E8500 5.9G 3D Benchable with Biostar TP45 HP

[NewBeetle]

Thank you all !!!

Very nice 5.9g.

This system with the X2's would be blazing fast

Thank you so much, k|ngp|n-san.
I tried the X2's but it didn't work...
It seems this mobo has PCI-E compatiblity problems in current BIOS.
I expect new 4870 CrossFire system.

Sweet work Mitsuaki Tanaka-san...

The biostar p45 boards just keep pushing it...

Will have a eye on u regarding further updates...

Keep pushing it...

Thank you always, Oliver-san.
Yes, I will keep pushing it.

great newbeetle! this motherboard is so impressive, it seems to be pushing what we percieve as good benchable fsb out the window

Thank you, youngpro-san.
Your Biostar Tpower P45 is very amazing!
Congrats your FSB WR !!!

Yep, very very nice .
Did you try max pi 1M, Cpu-z Valid and 2k1?

1M time is as fast as ASUS P965 mobos.
But 8M is bit slower by my poor tweak...

modPI 1M : 7.718s @6032.9MHz (FSB635.0MHz x 9.5)


modPI 8M : 1m47.687s @5890.0MHz (FSB620.0MHz x 9.5)


CPU-Z Validation : 6128.14MHz

Nice clocks!
I would to see SPI1M (or 32M ) with this clocks.
What about Performance Level?
You pushed it 1:1 so PL probably was high?

Yes,Performance Level is very high.
It's "9".

BRAVO Tanaka-san. Very nice.

Thank you, M8.
I think that this P45 mobo is more suitable for 3D bench than pi bench.

DEWA DEWA
NewBeetle

[AndreYang]

Team Japan again. Nice job for great clock 3D benching.

[SeLecT]

Very nice job!

What Fsb did you reched before modding?

[kiwi]

Hi

What TRD are you running @ 620 & 635? vmch = 1.5V?

[sobih25]

awesome bench with biostar p45 NewBeetle-san!

[Pedro Rocha]

Just amazing, congrats Newbeetle-San

[Brandybuck]

Great job NewBeetle 5.9ghz benchable E8500

[NewBeetle]

Thank you, sobih25-san and brandybuck-san.

Team Japan again. Nice job for great clock 3D benching.

Thank you so much, AndreYang-san.
This is just CPU test.
I wonder I will catch up with your great score.

Very nice job!

What Fsb did you reched before modding?

CPU-Z : 640MHz
SPi 1M : 630MHz

Hi

What TRD are you running @ 620 & 635? vmch = 1.5V?

MemSet setting : 4-4-4-4-10 / 4-26-9-11-11-4-8-6-4 / 2600T 2T
BIOS shows vmch : 1.440V (+0.400V)

Just amazing, congrats Newbeetle-San

Thank you so much, Pedro Rocha-san.
Next I will try another GPU systems.

DEWA DEWA
NewBeetle

[runmc]

Newbeetle-San -

You are a true "Champion" Congrats on the outstanding fsb

[George_o/c]

Congrats New Beetle-san Not only for the 5.9GHz 3D run which btw is just , but also for the great fsb you achieved and you SPi 1M run, just great !

Continue the good work, patiently awaiting your updates

[hey]

nice start Newbeetle-san, too bad you had problems with X2's, you just missed WR's . wolfdale+p45 will certainly be next benching platform

[LardArse]

Very nice NB san... the PWM is surprising too!

[Achill3uS]

omg what a chip & mobo you have NewBeetle-san, congrats for the amazing results
cant wait for the first 4870 CF runs with 5.9G cpu

[Pt1t]

Very nice Results on that cheap Motherbaord !

but why did you do vcore mod ? There is no OPV like Tpower I45, you can do +2v under windows without , and use the biostar software to change vcore by 0.01v under windows.

http://www.xtremesystems.org/forums/...82#post3100882

[gandalfone]

Congratz, very nice 3d frequency

I am sorry for high PL because I love spi32m

[hiwa]

very nice cpu u have newbeetle -san and really nice Spi 1m time and 3dmark scors

[NewBeetle]

Thank you, runmc-san, gandalfone-san, hiwa-san!

Congrats New Beetle-san Not only for the 5.9GHz 3D run which btw is just , but also for the great fsb you achieved and you SPi 1M run, just great !

Continue the good work, patiently awaiting your updates

Thank you, George_o/c-san.

Yesterday I tried another GPU system.
But MAXFSB and 3DMARK05 is very very slightly update.

MAX FSB : 692.07MHz


3DMARK05 : 36376 CPU/GPU/Mem/PCI-E : 5901MHz/900MHz/1100MHz/100MHz
M/B:BIOSTAR TP45-HPVer.5.0 vmod
CPU:Core2 Duo E8500 Q813A227
CPU cooling:MaxxNeo + LN2 / Temp:-135C
Chipset Cooling:Tara-chan 1st + LN2 / Temp:-50C
Mem:Team PC2-8500 C4 1GB x2 / 4-4-4-10
VGA:MSI RADEON HD3870X2(single)
VGA Cooling:stock
HDD:Western Digital WD360ADFD
PSU:SilverStone OP1200

nice start Newbeetle-san, too bad you had problems with X2's, you just missed WR's . wolfdale+p45 will certainly be next benching platform

Thank you always, hey-san.

Next I will challenge 05WR with new wolfdale + P45 system.

Very nice NB san... the PWM is surprising too!

Thank you so much, shamino-san.

I hope new FOXCONN P45 board is more surprising!

omg what a chip & mobo you have NewBeetle-san, congrats for the amazing results
cant wait for the first 4870 CF runs with 5.9G cpu

Thank you always, Achill3uS-san.

First lot of 4870 were sold out in Japan.
I could not buy it....
Then I decided to change only P45 mobo but not to change GPUs....

Very nice Results on that cheap Motherbaord !

but why did you do vcore mod ? There is no OPV like Tpower I45, you can do +2v under windows without , and use the biostar software to change vcore by 0.01v under windows.

http://www.xtremesystems.org/forums/...82#post3100882

Thank you for your information, Pt1t-san.
I decided to buy this Biostar board when I saw your fantastic results.

But my Bio board cannot work this vcore tweaker.
And I just love vcore mod very much.

DEWA DEWA
NewBeetle

[over@locker886]

Very nice start my friend with P45 system!

[dinos22]

wow i didn't see this thread

amazing
and you also say you were running PL9
that's very nice ...youngpro and i have been stuck with PL10 past 600 probably because of CAS5 clocks

i'll try some CAS4 clocks and some better cooling on NB

wonderful CPU as well

one question....your 8M there is a little slow....have you tried to tweak it some more....it should be in low 1m 4xs ...i know that you have a 1m 42s time with P5B DLX

[nachthymnen]

Fantastic scores as always NB-san
Now you need two 3870X2

[AndreYang]

First lot of 4870 were sold out in Japan.
I could not buy it....
Then I decided to change only P45 mobo but not to change GPUs....

I can send you more 4870s if you want. I don't know why I received a lot of 4870s when I am in Taiwan now.

[NewBeetle]

Very nice start my friend with P45 system!

Thank you always M8!
Next I will try more big run.

wow i didn't see this thread

amazing
and you also say you were running PL9
that's very nice ...youngpro and i have been stuck with PL10 past 600 probably because of CAS5 clocks

i'll try some CAS4 clocks and some better cooling on NB

wonderful CPU as well

one question....your 8M there is a little slow....have you tried to tweak it some more....it should be in low 1m 4xs ...i know that you have a 1m 42s time with P5B DLX

Thank you always, dinos22-san.
My 8M run is very slow because I have no special tweaks.
I hear Biostar P45 mobo can run faster with Strap tweaks.
Next I will try it.

Fantastic scores as always NB-san
Now you need two 3870X2

I have got a new P45 mobo today.
I hope it will work well with two 3870X2 CFX system.

I can send you more 4870s if you want. I don't know why I received a lot of 4870s when I am in Taiwan now.

Thank you so much for your kindness, AndreYang-san.
This weekend I will be able to get two 4870s.
But I may not buy them if I can run 3870X2s CFX system with new P45 motherboard.

DEWA DEWA
NewBeetle

[TheKarmakazi]

very nice benching as always newbeetle-san! cant wait to see your 4870's in CF!! Good luck on your next runs!

[SF3D]

Impressive work from you Mitsuaki-san!

I'm waiting your 4870 CF runs

[dinos22]

Thank you always, dinos22-san.
My 8M run is very slow because I have no special tweaks.
I hear Biostar P45 mobo can run faster with Strap tweaks.
Next I will try it.

oh i see...that explains things better

if you don't mind i would like to suggest that you try to boot at 600MHz FSB instead of 570
i found that when i boot at 590(haven't tried 570) my superpi is VERY slow...........but when i boot at 600 it's VERY fast

strange but it works heh

maybe you will be the first man to go below 1m 40s
that CPU is awesome...... 5.9Ghz with 1.85v is really special ....special CPU and special OCer is pure nerd sex on the beach