The 2x1GB/4x1GB/2x2GB/4x2GB DDR2 OC Database!

[gundamit]

Wanted to update the sticks I listed a little over a year ago. Now on an old P5B-D 965 mobo instead of the EVGA 680i.

Buffalo | gundamit | FireStix PC2-6400 CL5 | DDR2-800, 5-5-5-15, 2.35v | Micron D9GMH | CPU-Z Validated! & SuperPi 32M Stable! @ DDR2-1236, 5-5-5-15, 2.35v



Also got 2 sets of the Crucial 8500 Tracers that do pretty much the same

Buffalo | gundamit | Crucial PC2-6400 CL5 | DDR2-800 (Ballistix Tracers 8500, 5-5-5-15, 2.2v | Micron D9G** | CPU-Z Validated! & SuperPi 32M Stable! @ DDR2-1242, 5-5-5-15, 2.25v in bios

[JaD]

Core2Duo E6700 on DFI X38-T2R
SuperTalent T800UB1GC4 x2
2x2GB
800MHz 4-4-4-12 2.0v
1200MHz 5-5-4-11 2.18v- Memory Overclocked Speed, Timings and Voltage
ProMOS chips
http://valid.x86-secret.com/show_oc.php?id=314574


JaD


You can't imagine how upset I was when my GMH sticks were replaced with (supposedly) suckier ProMOS...well, considering i wouldn't run high vDDR anymore (the old GMH i had to RMA died on 2.35v 24/7) those sticks are pretty nice 600 5-5-4-11 with good subs is definitely a good result imo.
Too bad loosening subs/raising voltage has no benefits, a bit more juice for bench runs would have been appreciated :P


Everest results (old build, lastest stable hangs up the system, nothing special anyway at just 400x9):

I didn't notice 3+ hours of large FFTs calculation or PI 32M were necessary, my bad

2x 32M SuperPI running:


completed:



SuperTalent | JaD | T800UB1GC4 | DDR2-800, 4-4-4-12, 2.0v | ProMOS | CPU-Z Validated! & SuperPi 32M Stable! @ DDR2-1200, 5-5-4-11, 2.18v

[[EvQ]RheA]

Interesting results... I need to give it a test run myself once I get my new mainboard

[windwithme]

that's windwithme's signature, wherever you see the crystal cat expect a good review.

Yes, thanks

[Don_Dan]

Although I'm very busy at the moment, I had some time yesterday, and decided to give my new set of Crucial Ballistix 5300 a run.

Crucial | Don_Dan | Crucial Ballistix 5300 BL2KIT12864AA663 16FD2 | DDR2-667, 3-3-3-12, 2.2V | Micron D9GMH | CPU-Z Validated & SuperPI 32M stable! @ DDR2-1100, 5-5-5-18, 2.32V

I don't know if they are D9GMH, because I haven't removed the heatspreaders, but I think this IC has the highest probability of being the correct one. The results are not that good, and I'm not 100% happy with them, so I will try to beat them when I have some spare time again.
Maybe my mainboard was limiting me here, or more precisely NB cooling.

[kingskawn]

Hi there

I've problem with choosing my memory for my newest config. I'm planning to take gigabyte GA-P35-DS3P with 4gb (2x 2gb)

But I've looked over this forum and saw a lot of interested things. The problem is that I can't see the good ones in the bad ones so if you can enlighten me with some ideas.
I saw 4 series that looks interesting but I don't know if it's a good choice. Can you help me please

• G.Skill DIMM Kit 4GB PC2-8000U CL5-5-5-15 (DDR2-1000) (F2-8000CL5D-4GBPQ)
  
• A-DATA Vitesta DIMM Kit 4GB PC2-6400U CL5 (DDR2-800)
  
• OCZ Platinum XTC DIMM Kit 4GB PC2-8000U CL5-5-5-18 (DDR2-1000) (OCZ2P10004GK)
  
• OCZ Reaper HPC Edition DIMM Kit 4GB PC2-8500U CL5-5-5-18 (DDR2-1066) (OCZ2RPR10664GK)

[RealTelstar]

The best 2x2 choice today is OCZ FleX pc-9200.

[ViRuS2k]

http://valid.x86-secret.com/show_oc.php?id=376702

FlexII 2x2 = 4 @2.1v
5.4.4.12.3.18.3.8.7.8 @1196mhz

---------------------

[mop231]

any1 could help me config the timings on my rams? got 2x1 crucials bl2kit12864al804 kit and cant get it stable(@ 583 ) lately
or just pm me witch some timings faq for p35 and so on i found something but for nvidia'a chipsets
anyway thx for help

[Unrealer]

testing...2x1Gb Tracer 6400

Crucial | Unrealer | Tracer PC2-6400 BL2KIT12864AL804 | DDR2-800, 4-4-4-12, 2.2v | ¿?¿? (single side) | CPU-Z Validated! & SuperPi 32M Stable! @ DDR2-1070, 5-5-5-15, 1.91v





not bad?

[mop231]

when i bought mine tracers i had stable 600mhz cl5 with 2.2v

[Don_Dan]

Here is a result from my first DDR2-RAM ever, my good old Corsair Dominator 6400C4D.
I had them running at those settings for over half a year without a problem. But I just noticed I forgot to take a CPU-Z validation... Anyway, here it is:

Corsair | Don_Dan | CM2X1024-6400C4D | DDR2-800, 4-4-4-12, 2.1V | ProMos | Awaiting CPU-Z Validation & SuperPI 32M stable! @ DDR2-800, 4-4-4-12 1T, 2.10V

Please note that this is an entry for the Intel 1T section, also, the second entry for ProMos based RAM.


On a side-note, I wonder why no one ( or almost no one ) posted some 4GB ( 2x2GB ) entries. Come on guys!

[DoGMaN]

Still going but here is an interm shot

Corsair | DoGMaN | TWIN2X2048-6400C4| DDR2-800, 4-4-4-12, 2.1v | Unknown | CPU-Z Validated! & SuperPi 32M Stable! @ DDR2-914, 4-4-4-12, 2.1v

- Intel
- Corsair Twin2X-6400C4 Rev 2.1
- 2x 1Gb
- DDR2-800, 4-4-4-12, 2.1v
- DDR2-914, 4-4-4-12, 2.1v
- Unknown
- http://valid.x86-secret.com/show_oc?id=398642
-
- DoGMaN

[RCG_Bex]

Hey guys, I've had a read through, and having trouble deciding. I know I can't get the Crucial kits (bummer because 1 of the main offices is not far from here) due the board having issues with it (I'm using the Maximus Formula).

Currently using Adata Extreme 1200's which OC like a mofo! But sadly I need more than 2GB now. Need at least 4GB. (My PC is crashing when flicking through large jpg's)

Can get my hands on most memory brands in the UK so whatever's best to pair up with my QX9650 + maximus formula.

I'll give the crucials a go if people think I should at least have a bash (there are some success stories after all)

~Bex

[Don_Dan]

Another result from me:

TeamGroup | Don_Dan | Team Xtreem TXDD2048M667HC3DC-M | DDR2-667, 3-3-3-8, 2.2v | Micron D9GMH | CPU-Z Validated! & 4hrs Prime 95 Stable! @ DDR2-1066, 5-5-5-15, 2.19v

I know it's not 4 hours entirely, more 3 hours 55 minutes, but it's dead stable at those settings, the odd time reading is because I messed with my Windows date monitoring. ( can't translate it better... )


By don_dan at 2008-10-02

[kaskuli]

|Corsair| Kaskuli | CORSAIR TW3X2G1600C9DHX G ver 3.1 |Micron D?????|DDR3-1600, 9-9-9-24, 1.80v | CPU-Z Validated

[VVJ]

Here is my score:



Kingston ValueRAM DDR2-800 2x1024MB @2.0V 5-5-5-18 (in dual-channel mode). I bought both modules for $50 three months ago.

So, why do people buy expensive pop-RAM, if even cheap Kingston kicks it very well?

P.S. I'm going to hit 500MHz tomorrow.

[PlanetDynamic]

570MHz CL4-4-4-4 @ 2,43 Volt - 2h Prime Blend Stable :hwluxx:

[VVJ]

PlanetDynamic,
I wonder how long can your RAM operate at such parameters before it die? In two, three, four weeks?

[Shiranui Gen-An]

They should last longer than that at 2.43V if they're cooled properly.

[PlanetDynamic]

The VDIMM is only (!) for Prime Blend testing and no 24/7 Setting.

[WaterFlex]

CellShock "Red Devil" 5-5-5-15. VDimm=1,99. PL=8. Totally stable. 24\7 usage setup.

[Don_Dan]

Sorry guys, but all those entries aren't correct, did you read the rules about showing stability ( 32m instances or Prime 3h+ )?

[flesheatinvirus]

my Teamgroup at 1360 at 2.55v.

[ezaleina]

Here my score..