Here you go

Chip QX9650 @ 4.200 mhz
Memory OCZ 8500 Gold Rated 1066 7-7-7-21-1t - Set 1680 7-7-7-22-1T @ 1.95 v

XFX Bios P05

System Clocks

**Frequency Settings**
CPU Freq, MHz 4.200.00 mhz
FSB Reference Clock, MHz 1680.00
CPU Multiplier [10X]
PCIe x16_1 & 16_2, MHz [100] 100
PCIe x16_3, MHz [100] 100
SPP<->MCP Ref Clock, MHz [200] 200

**HT Multiplier**

nForce SPP --> nForce MCP [5 x]
nForce SPP <-- nForce MCP [5 x]

**Spread Spectrum**

CPU Spread Spectrum Disabled
HT Spread Spectrum Disabled
PCIe Spread Spectrum(SPP) Disabled
PCIe Spread Spectrum(MCP) Disabled
SATA Spread Spectrum Disabled

FSB & Memory Config

FSB – Memory Clock Mode [Linked]
FSB – Memory Ratio [SYNC MODE]
FSB (QDR), MHz [1680.00]
Actual FSB (QDR), MHz 1680.00
x MEM (DDR), MHz Linked
Actual MEM (DDR), MHz 1680

P1 Enabled (Makes a big difference to bandwidth Enabled)
P2 Enabled

Memory Timing Setting

Memory Timing Setting [Expert]
x tCL (CAS Latency) [7] 7
x tRCD [7] 7
x tRP [7] 7
x tRAS [22] 22
x Command Per Clock [1T] 1T

** Advanced Memory Settings **

x tRRD [5] 5
x tRC [20] 20
x tWR [12] 12
x tWTR [25] 25
x tFAW [30] 30
x tREF [7.8us] 7.8us

System Voltages

CPU Core [1.55000 v] 1.47 v
CPU FSB [1.30 v] 1.30 v
Memory [1.95 v] 1.95V
nForce SPP [1.45 v] 1.45V
nForce MCP [1.65 v] 1.65V


GTLVREF Lane 0 [Auto] -50 mv
GTLVREF Lane 1 [Auto] -50 mv
GTLVREF Lane 2 [Auto] +00mv
GTLVREF Lane 3 [Auto] +00mv

CPU Configuration

Limit CPUID Maxval Disabled
x Intel SpeedStep Disabled
xPPM Mode [Native]
CPU Thermal Control [Disabled]
C1E Enhanced Halt State [Disabled]
Execute Disable Bit [Enabled]
Virtualization Technology [Disabled]

CPU Core 0 Enabled
CPU Core 1 [Enabled]
x CPU Core 2 [Enabled]
x CPU Core 3 [Enabled]
I've tested these settings with OCCT and they are 1 hour stable.



And one hour in Prime Blend. Note I'd recommend running Blend and OCCT. Previous tests with OCCT and large FTT in Prime, didn't pick up on errors that Blend did.



RLM