Suprise . . .I like blingy resevoirs . . .You should talk to TribalOverkill some
Suprise . . .I like blingy resevoirs . . .You should talk to TribalOverkill some
did some color changes, blue as a scheme. i like it
i forgot the measure the inside diameter of the ek res
and i reminded myself multiple times to do it!
i personally like a more creative res too, tribaloverkill
has some amazing work, its crazy since it all done by
hand.
hopefully when i have time today i have another design
in mind. moving away from the cylinder shape
Stick with the silver mounts imo
No way, the full clear looked best.
evil, your socali?
care to make one for me?
PM me the price, i would love a custom res from a local builder.
I would love the internal to be either black or mirrored plexiglass tho.
That would look tight.
Actually i'll dont mind taking the internal blue one either.
One favor tho, can you make the top thread single? Or dual it up so it matches the Koolance fan mount. Then you can use koolance's mounting hardware and mount them directly to fans or on a 120mm fan hole.
Last edited by NaeKuh; 06-13-2008 at 02:13 PM.
Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous?*
Miyuki: W3580 6GB DDR3 P6T-Dlx
Lind: Dual Gainestown 3.07
Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*
Its my fault.. and no im not sorry about it either.[12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
[12:38] Naekuh: i love watching u get the firing squad on XS
A work of art! You have mad rendering skillz!
It's all your fault every time I see a new product picture now I have to doubletake and make sure it's real..
OH DOE! these are all rendered?
I was thinkn, oh boy i get another toy to play with. :\
Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous?
Miyuki: W3580 6GB DDR3 P6T-Dlx
Lind: Dual Gainestown 3.07
Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*
Its my fault.. and no im not sorry about it either.[12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
[12:38] Naekuh: i love watching u get the firing squad on XS
Amazing work.
Man there's some creative s*** on here!
Time is an illusion. Lunchtime, doubly so. Douglas Adams
QX9650 @ 3825mhz CoolIT FZone
2x HD3870X2 @ 845/946mhz air
Asus Maximus Formula 0907
2x2048mb OCZ Reaper 8500
2x Raptor 150G Raid0; 'Cuda 1000G
1200W Thermaltake
xFi Extreme Gamer/ Z-5500
Vista Ult. 64
Cosmos 1000
30" NEC
haha, sorry yea there all renders :/ but ill be attempting to make a few soon
just need to make some material lists and finally buy a scroll saw and some
sanders, might be a while, just bought my camera!
Yeah i really like his project "Blackout" some amazing work there.Originally Posted by evil-98
That Res looks awesome.
I would love to have an Evil res in my loop. Great work and ideas
-TJ07
-Core i7 920
-Rampage II Extreme
-EVGA 8800 Ultra
-Corsair Hx1000w
-Corsair 6GB DDR3-1600 Dominator
-Intel 80GB SSD gen.2
-WD 6400AAKS Raid 0
lookin' good evil, I'm digging the direction you're going with this.
yeah when you can calculate aprox. cost I would love to buy one!
thanks everyone, im going to commission an acrylic company to do all the cuts for me
so i can just attempt to assemble it. and if im not successful, DIY kits
Just an FYI.....acrylic tubes aren't exactly "round", could make making these nice looking reservoirs a realto assemble.
Circles SucQ!
If your annoyed by sigs telling you to put things in your sig, then put this in your sig
Bribery won't work on me...just say NO to AT!!!
you mean the fillets? couldnt i just route it very carefully? if not i could make a jig to hold the 2" rod and run it on my drill press and manually carve the fillets
either way of course its not going to be easy, ill try my best
If your planning on making these from solid acrylic rods, then I don't see a problem.
It would however be more efficient/cost effective to use acrylic tubing, the problem with cast acrylic tubing (even extruded to some degree) is the inside and outside diameters of the acrylic tubes are slightly oval. The insides would need to be turned to true them up for solid mounting of the internals.
Circles SucQ!
If your annoyed by sigs telling you to put things in your sig, then put this in your sig
Bribery won't work on me...just say NO to AT!!!
clear holders ftw
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Gee never had anyone offer to buy my custom res and it exsists lol. It did cost me a ridiculous amount but its the only one and I love it to bits. Being bronze it does heat up when gaming.
Good on you evil, get creative and make something different, its to easy to just buy everything.
[IMG][/IMG]
It holds about 1.5 litres.
thats a very bold res you have there fragger, i do like the polished bronze
anyone know of a place i can get extruded acrylic tubes locally in socal?
its getting to expensive to get it all cut and shipped here..all i really
need is some rods and some tubes.
also whats the recommended adhesive? im looking locally but i cant find
any acrylic glue/weld.
Nice work mate, first time I've seen somebody render a technical drawing properly, cheers!
What renderer did you use for those stills? Vray?
CM Stacker 810 w/ Yate Loons | Enermax Infiniti 650W
ASUS P5K Deluxe | Corsair XMS2 PC2-6400 2x2GB
Intel Core 2 Quad Q6600 | Thermalright Ultra-120 eXtreme
BFG Geforce 8800GTS 640MB | ASUS Ageia PhysX P1 128MB
Logitech G15 | Logitech G5
all render were done in maxwell render
check out tribaloverkills resevoirs over at www.bit-tech.net they are incredible!
mentally confused and prone to wandering
what program did you use bro?
Q9450 @3.60 Ghz, Striker II Formula, Evga 9800GTX (863/2050/1200), 2X2gb 1100 5,5,5,18 D9's at 2.20V
Cooled by: MCR320, D-Tek Fuzion V2, MCP335 w/ EK G3/8 TOPS, Full BP high flow 1/2" fittings
Oh and Vista Ultimate (i know, I KNOW!)
hey Evil, tho the idea of "baffles" inside the res is great... what about cleanup? it looks like a lot of compartments.. perhaps a tad simpler and yet effective?
i'm curious as to how you will create the rounded edges and such... but love your idea bro...
Naekuh, bro, you need to wipe the crud off your eyes man... LOL!
"The ultimate measure of a man is not where he stands in moments of comfort and convenience, but where he stands in times challenge and controversy."
Dr. Martin Luther King Jr.
DIY: Self Clinching Nuts
Canon EOS 7D | Tokina 12-24mm f/4 | Canon EF 24-105 f/4 L | Canon EF 70-200 f/2.8 L IS Mk II | Canon EF 35mm f/1.4 L | Canon EF 400mm f/5.6 L | Canon EF 100-400mm f/4-5.6 L
And where are they on this site?
@Evil....Love your designs especially the acrylic one's with the LED's. Wonder what they would look like with red LED's.
Reply With Quote
Bookmarks