Water Cooled Case Gallery

**Anemic** · 06-12-2008, 05:00 AM

Ahhh, so many great looking builds! Im going to start working with my own loop today and Im so excited!

**inCore** · 06-12-2008, 06:33 AM

Originally Posted by nullface

Thats not a PA120.2
http://www.thermochill.com/guides/PA120-2.pdf

That makes me confused, seeing as I took out the ruler and measured my PA120.2.

**pvtdonuts** · 06-12-2008, 09:46 AM

Originally Posted by inCore

That makes me confused, seeing as I took out the ruler and measured my PA120.2.

The one you had earlier looks like it came from a GTX240, which is what I have, plus the design does not look at all like a TC

**D-Cyph3r** · 06-12-2008, 02:25 PM

First post (of no doubt many), so hi there!

Anywho, this is my current machine, specs in sig (although as you can see the PA120.1 hasn't actually been added yet, been sitting on my desk for near on a month, god dang procrastination!):

**ka lok** · 06-12-2008, 03:24 PM

Originally Posted by D-Cyph3r

First post (of no doubt many), so hi there!

Anywho, this is my current machine, specs in sig (although as you can see the PA120.1 hasn't actually been added yet, been sitting on my desk for near on a month, god dang procrastination!):

first things first, hi there!

Your build is looking good so far

do like the red coolant.

I would shorten tubing a tad though

**leo_bsb** · 06-12-2008, 06:38 PM

BlackHouse and D-Cyph3r: great build and skills, good job!

**louie101086** · 06-13-2008, 12:36 AM

love the red looks like blood i cant wait to sell off all my old things and start something new and fresh

**xpatar** · 06-13-2008, 01:03 PM

I just got some new parts did a few mods and there it goes.....

...and if you are interested about how the Enzotech wb performs against my good old Apogee GT take a look at my sig, there is a link with a review I wrote about them.

**p2501** · 06-13-2008, 01:05 PM

BlackHouse, could you post/link high res pics of your build, it looks amazing!

**~~MomijiTMO~~** · 06-13-2008, 03:05 PM

I love Enzotech blocks.

**oerekum** · 06-13-2008, 03:10 PM

Originally Posted by MomijiTMO

I love Enzotech blocks.

Yeah that thing looks great O_o

**xpatar** · 06-13-2008, 11:17 PM

Originally Posted by MomijiTMO

I love Enzotech blocks.

Yeah, me too mate.

**Bubbaxm2** · 06-14-2008, 12:30 AM

Might have to get myself one of those.

**Arni** · 06-14-2008, 12:55 AM

You heve old or new revision Enzotech blocks? No leak ?

**~~MomijiTMO~~** · 06-14-2008, 01:36 AM

The new revision has a copper top with the acrylic piece on top. No leaks are good.

Either way, all acrylic tops are fine so long as you don't over-tighten the barbs which is a lot harder than it sounds.

**moogle** · 06-14-2008, 01:45 AM

first wc build.

Night Shots

'Big Boy' 200mm Fan Shot

Front Shot

Sorry for the crappy pics

**xpatar** · 06-14-2008, 02:50 AM

Originally Posted by MomijiTMO

The new revision has a copper top with the acrylic piece on top. No leaks are good.

Either way, all acrylic tops are fine so long as you don't over-tighten the barbs which is a lot harder than it sounds.

Just as you decsribed it!!!

**xpatar** · 06-14-2008, 03:55 AM

Originally Posted by Arni

You heve old or new revision Enzotech blocks? No leak ?

These are new rev. but you have to be careful not to overtighten them. Also it is preferable to use the included hose barbs cause as Enzotech describes it in the manual total thread length greater than 7mm / 0.28 inc will cause damages to the top (cap).
So far no leaks.

**Raxxath** · 06-14-2008, 08:55 AM

Here's a quick picture I took of my rig I finally finished. Maybe I'll make a thread with more pictures of the process and all. I had everything prepared for a second loop too, but I'll likely be replacing the GX2 soon, so it will have to wait until I get a new video card.

EVGA 9800 GX2
C2D E6700
Asus Blitz Formula
2x1GB Crucial Ballistix PC8500
WD6400AAKS
Corsair HX620
Lian Li PC-A70B

D-Tek FuZion
Swiftech MCW30
Thermochill PA120.3
D-Tek dB-1
Swiftech Micro res