Not so overclocked but STABLE (run Prime95 for 7 hours and MemTest86 two full passes --- all OK)...![]()
![]()
![]()
![]()
Used 0503 and these settings (QX9650, 4X1GB CELLSHOCK 1800Mhz 8-7-6-1)
Basically all AUTO except :
CPU RATIO 0.80
FSB 450
PCIE 105
RAM FREQUENCY 1801
RAM CR 1N
RAM CLOCK 7-7-7-20
CPU VOLT 1.38750
PLL VOLT 1.56
FSB TERM VOLT 1.26
RAM VOLT 2.02
NB VOLT 1.51
NB GTL VOLT 0.67
CPU SPECTRUM Disabled
PCIE SPECTRUM Disabled
and under CPU Configuration Menu : C1E SUPPORT and VANDERPOOL TECHNOLOGY both Disabled. Finally under NB Chipset Configuration Menu : MEMORY REMAP Disabled.
All these made my system run at 3.600Mhz and DDR3 at 1800Mhz 7-7-7-20-1T and - the most important - FINALLY STABLE !!!![]()
![]()
![]()



Reply With Quote
Bookmarks