Ok so for the vmod all I have to do is put a pencil mark on the resistor he marked?

E8400 @ 3.915 GHz. This ran stable for a hour on Orthos before I had to stop it. I just can't seem to get over 440 on the FSB even upping the voltages on the NB and other areas. Max temp was 61 C according to real temp (My room is a bit warm due to a heat wave).

I need a check over on the settings I'm using right now:
FSB @ 435
Mem @ 870 5-5-5-18
VCore @ 1.4125 (Drops under load)
CPU PLL Voltage @ 1.56
FSB Terminal Voltage @ 1.38
DRM Voltage @ 2.16
NB Voltage @ 1.47
SB Voltage @ 1.150
LC Enabled
CPU GTL @ .63x
NB GTL @ .67x
SB 1.5V @ 1.6
CD/PCIE spread disabled