**Official ABIT IP-35 Pro Review/Overclock/Guide Thread**

[Ace-a-Rue]

same-same for me...i stopped myself from getting wrapped around the axle

[JPH1589]

I have a Xeon 3050 in my Ip35 Pro ver 1.1 bios 16. I struggled back and forth with different memory and finally got some new double sided ballistix back from RMA and decided to take another crack at an overclock.

In the beginning i was a little put off that the bios set the vid at 1.325 and would not let me go below it. But oh well. In the long run 1.325 is all this chip needs to do 3.2ghz. I was pulling my hair out for quite some time trying different voltages on the NB and cpu and different memory timings etc etc. It was getting really frustrating because I was pretty sure this cpu was a capable one. I kept getting blue screen irg_not_egual.....yada yada.....on the uguru.sys module.

It didn't seem to matter how high I set the voltages or how loose I set the timings. And I never got any errors for anything except that uguru.sys. I just kept getting those blue screens every day or so.

So this morning I uninstalled the uguru windows software and the driver for the chip and removed the driver software. I set the FSB at 400 and the memory at 1000mhz with 5-5-5-15 and the vcore is 1.325 (stock) and mch is 1.33v. Memory at 2.2v of course. Everything else at stock.

It does an 18 second superpi million and passes OCCT and Everest stress and memtest86 3 passes and superpi 32 million two concurrent runs.

Now with the uguru.sys driver removed and the uguru chip basically disabled to windows the bios still does fan control and reports temps the same as it should. I imagine if I had thrown 1.46v at it like others have, I might have gotten it stable without the uguru.sys blue screens, but I can't imagine why I'd need to when it runs perfectly sound at stock voltage and 3.2ghz.

These were nice results for a day when it was too hot to go outside. I would have posted this on the abit forum but it has been down for 3 days and the taiwan abit site is gone too. I hope that doesn't mean anything bad.


Edited Photo