Official Core 2 Duo E7200 thread

[NBF]

That's not VID mate, VID can only be read out by CPU-Z, Real Temp and coretemp...so you need to install the CPU

check my list for good or known batches

http://users.pandora.be/OAP/wolfdaleOClist.xls

Good work listing the batches

I see that mine is the worst by far, maybe I shold try it in another board.

[ ]s

[Leeghoofd]

Good luck !!! and happy batch hunting ...

[keenan]

I don't think it has a VID of 1.186, unless you meant to type 1.185 which would be very high. Use CoreTemp to check

At least you have good contact

Here is coretemp with my Vid.... 1.1875V

[carajean]

Ok I went to a local store and got the proc didnt feel like driving a 2 hours both ways for microcenter. Here is a pic of the codes and stuff.



Sorry bad camera phone pic and i dont know how to make it big like the rest of you guys.

So far I got it at 3.1

I havent been able to order the ram suggested to me yet, but I will tuesday.

[triple_A]

Ok I went to a local store and got the proc didnt feel like driving a 2 hours both ways for microcenter. Here is a pic of the codes and stuff.

Cool!
Looking forward to hear from you how much of a difference it makes compared to the e4300.

[carajean]

Ok right now im at 3.6 ghz dont know if its stable just yet. But im at 1.36 vcore

In Core Temp 0.99 my 52c till TJ max Right now in pc wizard my cpu temp is 33c but the cores are reading at 53c /shrug shoulders.

Im gonna run some test like Pi and Prime. I will wait for orthos.

[carajean]

Tried to run OCCT the proc got too hot and the program quit. It may have gotten up to like 70. Im gonna try gaming on it while keeping an eye on the temp, and see what happens.

[Leeghoofd]

You can alter OCCT in the settings menu and set that too eg 80°C, it takes into account TJcasemax 105 while most peeps assume it's 95°C... so it's temp readings are 10°C off...

[carajean]

Ok now to address the fact that im heating up. I applied the thermal in a thin line across the writing. I also have the zerotherm cooler http://www.newegg.com/Product/Produc...82E16835887004

I need to get a better cooler for this thing.

[Funky]

Looks like I found a little gem here.


Batch # : Q808A537

[fragmasterMax]

The c0's look like there doing great. They look like there. neutered e8500's. I'm going to micro center to replace my fubarred q6600, should i look for a slavr, or a slavn?
Thank you!!!!!!!!!!

[breakfromyou]

Guys, do you all have any idea how helpful it would be to include your chips VID with the batch number? We should keep track of this, as we must find good weeks, or maybe some kind of trend along with the batch numbers...heh

[fragmasterMax]

hey so it looks like the c0's are slapc's. can someone with one confirm, i want to make sure i pick a good one lol

http://processorfinder.intel.com/det...px?sSpec=SLAPC

[tranngocminh]

E7200 w/ TRUE
ASUS P5E

@3,8Ghz - 1,3v



@4,1Ghz - 1,4v

[fragmasterMax]

Trann
Are those temp readings right? Is your true running without a fan?

[XxPuNTeRxX]

Looks like I found a little gem here.


Batch # : Q808A537

Hell yeah its a nice one man.

[tranngocminh]

Trann
Are those temp readings right? Is your true running without a fan?

CoreTemp 0.98.1 detect TjMax = 105* but CoreTemp 0.99 & RealTemp 2.5 detect TjMax = 95*.
I think CoreTemp 0.99 & RealTemp is right.

My system, ambident temp ~ 26*

[thepfy]

Try that setting, 9.5 x 400 with 1.375V that should be stable

Thanks I'll try when I get a chance. I've checked the VID and its 1.215V I'll post the other info tonight.

[carajean]

I have mine at 9.5x400 with 1.33 with special add .23%

[Plester]

settled on this for 24/7

[carajean]

Dang plestor thats the overclock I want I may have it tonight. I gotta drop my temps though. Im also not sure about my vcore being that low.

[carajean]

I can not get 3.8 stable. I can get 3.6 stable with a max temp of 69c. But 3.8 I cant get stable orthos fails within 8 seconds.

3.6ghz 1.3 VID, 1.2 VTT, NB 1.3
3.8ghz 1.35 VID, 1.3 VTT, NB 1.4

I know I need a better cooler its comin later tonight im gonna try that Freezer 7 pro, heard it was pretty good for cheap.

If I cant get 3.8ghz stable I wont be able to get 4.0, which makes me a sad panda.

[Leeghoofd]

bang for the buck it's a nice cooler but no idea if it's enough for CPU's at 4ghz... woudl have been better to straight go for a decent solution mate ...

[carajean]

Well im getting the cooler from my boy for 10 bucks so its worth a try. I may just ask him to try it for awhile and if I get it to 4.0ghz then pay him lol. What would you suggest for a cooler for that high of a clock.

[ZenEffect]

Well im getting the cooler from my boy for 10 bucks so its worth a try. I may just ask him to try it for awhile and if I get it to 4.0ghz then pay him lol. What would you suggest for a cooler for that high of a clock.

liquid.