**Official DFI LanParty UT X48-T2R(and LT) Discussion

[ReDRaiN]

Hi all guys,i have a questio.
who is the best bios for this mobo?
im using qx9770 and patriot extreme pc9600.
cant boot @460 fsb on stock bios.


regards

[Jor3lBR]

Hi all guys,i have a questio.
who is the best bios for this mobo?
im using qx9770 and patriot extreme pc9600.
cant boot @460 fsb on stock bios.


regards

You don't have a SIG so it's impossible for us guess what mobo you are talking about...

[adya]

i managed to lower my timings somewhat , to 5-5-5-15-42 still cant get 4-4-4 it just goes spastic if i do . no shortage of volts either. but i did get mhc and performance level to 8. is lower or higher better? not much info on these settings.
also i tried e-a-e-e-e- /e-a-a-e-e- but it wouldnt post . tried many times same result ,no post. c1 sometimes sticks on 25.
im not sure why my latency is so slow . ive tried differenct modules -double sided ballistix this is all highend gear im using . psu cpu etc it should be giving me alot more. i cant even get 4-4-4-12 with 2gb ram. im starting to think its the board. every change i make makes it c1 . does this board ever not c1 lol its all it does , its like its being designed to c1 on a pro level. its so annoying.tested my ram on another system and it runs great but on this board it just gives u c1.

[CrapCrasher]

I managed to fix stable my UT X48 with a Q9450 cpu and 4x2gb g.skill 8500 at 3400mhz (8x425), with the following settings:

CPU 1.35000v
DRAM 2.03v
SB 1.510v
NB 1.392v
VTT 1.250v
GTL 115-107-100

considered this is my first attempt with DFI I cannot complain that much if somebody has any suggestion to fine tune even better my settings feel free to do so, my end goal is to reach stable 3600mhz (8x450) for 24/7 usage.

[ReDRaiN]

You don't have a SIG so it's impossible for us guess what mobo you are talking about...

is this DFI X48 thread?maybe im talking about this mobo DFI lanparty ut X48.

[Praz]

is this DFI X48 thread?maybe im talking about this mobo DFI lanparty ut X48.

Are we suppose to guess if you are referring to the UT board? If so, there is only one BIOS available right now. As such that would be the best one.

[Sauron_Vie]

is this DFI X48 thread?maybe im talking about this mobo DFI lanparty ut X48.

[TouGe]

I managed to fix stable my UT X48 with a Q9450 cpu and 4x2gb g.skill 8500 at 3400mhz (8x425), with the following settings:

CPU 1.35000v
DRAM 2.03v
SB 1.510v
NB 1.392v
VTT 1.250v
GTL 115-107-100

considered this is my first attempt with DFI I cannot complain that much if somebody has any suggestion to fine tune even better my settings feel free to do so, my end goal is to reach stable 3600mhz (8x450) for 24/7 usage.

Do you really need that much VTT to hit 425MHz on the FSB? Not slamming you, just curious.

[TouGe]

Just purchased 4x1GB Cellshock PC-2 8500 D9GMH 64Mx8 chips from MemoryC. I hope these clock better than my 4x1GB PC-2 8500 D9GKX Mushkins did on this board. I had a hard time getting 5-5-15-42 @ 1067MHz PL7 stable on this board when I was running 5-4-4-12-32 @ 1067MHz PL7 on my Maximus/Rampage conversion. This has got to me my last DDR2 purchase or I am never going to be able to move up to DDR3.

[Sauron_Vie]

Do you really need that much VTT to hit 425MHz on the FSB? Not slamming you, just curious.

what vtt and gtl do you need to hit 400 fsb ?

[anubis_is_evil]

need help guys.....

just bought E8400 but i dunno why, nothing can detect it, whats going on here...? heres the ss of real temp, everest, core temp, and cpuz.....



anyone any idea whats going on ?

thx

[TouGe]

what vtt and gtl do you need to hit 400 fsb ?

@ 400MHz VTT=1.10V & GTL's set to default. I realize that beyond ~415-420MHz both VTT & GTL's might need to be adjusted for quadcores but I didn't think 1.20V would be required.

[Sauron_Vie]

@ 400MHz VTT=1.10V & GTL's set to default. I realize that beyond ~415-420MHz both VTT & GTL's might need to be adjusted for quadcores but I didn't think 1.20V would be required.

wow, this is reallý less. have to check if my qx can do that also. Thx for Info.

[zsamz_]

Just purchased 4x1GB Cellshock PC-2 8500 D9GMH 64Mx8 chips from MemoryC. I hope these clock better than my 4x1GB PC-2 8500 D9GKX Mushkins did on this board. I had a hard time getting 5-5-15-42 @ 1067MHz PL7 stable on this board when I was running 5-4-4-12-32 @ 1067MHz PL7 on my Maximus/Rampage conversion. This has got to me my last DDR2 purchase or I am never going to be able to move up to DDR3.

yup you be good the mushkin d9gkx good on the board cas4 only

[asap]

need help guys.....

just bought E8400 but i dunno why, nothing can detect it, whats going on here...? heres the ss of real temp, everest, core temp, and cpuz.....

anyone any idea whats going on ?

thx

have u tried resetting cmos? or possibly bios update?

[palese]

need help guys.....

just bought E8400 but i dunno why, nothing can detect it, whats going on here...? heres the ss of real temp, everest, core temp, and cpuz.....



anyone any idea whats going on ?

thx

Looks like cpuz detect's it and if nothing else does after loading the latest bios then return the board.

[ZenEffect]

anubis_is_evil, is multicore processing enabled or disabled in bios?

[wilson]

Hi guys can any1 tell me if this looks ok for my new oc.

[TouGe]

yup you be good the mushkin d9gkx good on the board cas4 only

You were able to hit 4-4-4-12 @ 1000MHz w/ your Mushkins on this board? If so, what NB voltage did you need? I would have been happy with those timmings @ 1000MHz but for some reason I couldn't get CAS4 to work. Did you have to lax PL in order to get such tight timmings?

[TouGe]

Hi guys can any1 tell me if this looks ok for my new oc.

I don't know, to me your Rd speed seems rather low and your latency high. Couldn't you choose a different divider to increase throughput and maybe go 5-4-4-12 w/ your timmings? I was in the mid 9000's with a much lower latency running 1067 @ 5-4-4-12 on my old Formula/Rampage board.

[ZenEffect]

You were able to hit 4-4-4-12 @ 1000MHz w/ your Mushkins on this board? If so, what NB voltage did you need? I would have been happy with those timmings @ 1000MHz but for some reason I couldn't get CAS4 to work. Did you have to lax PL in order to get such tight timmings?

on my mushkins i can run 4-4-4-15 pl8 @ 1000mhz. i found that 1200mhz 5-5-5-18 pl7 was much much better though. nb on 4-4-4-15 was around 1.45ish volts

[Sir Lancelot]

Hi to All,

One simple question: is the bios from 20-03-2008 the last one for the LT board?

In DFI website, it's the last one available, but in the beta section this board is not even listed there...


This seems strange, because I've read here some time ago about a new bios comming out soon...but that "soon" seems to be 1 or 2 months ago...



HastaSSSS

[TouGe]

on my mushkins i can run 4-4-4-15 pl8 @ 1000mhz. i found that 1200mhz 5-5-5-18 pl7 was much much better though. nb on 4-4-4-15 was around 1.45ish volts

That's a 2 gig kit though, right? So I'd probably need around 1.55V for a 4 gig kit then, about the same as I needed with my old board. Have you tried to hit CAS4 w/ 4 gigs? I'm starting to think its nearly impossible to hit CAS4 w/ 4 gigs.

Hi to All,

One simple question: is the bios from 20-03-2008 the last one for the LT board?

In DFI website, it's the last one available, but in the beta section this board is not even listed there...


This seems strange, because I've read here some time ago about a new bios comming out soon...but that "soon" seems to be 1 or 2 months ago...



HastaSSSS

I spoke with Clunk the other day and he had said that the new BIOS should be out any day now, until then 0320 is the current BIOS.

[Sir Lancelot]

Thankx for the info m8

[zanzabar]

That's a 2 gig kit though, right? So I'd probably need around 1.55V for a 4 gig kit then, about the same as I needed with my old board. Have you tried to hit CAS4 w/ 4 gigs? I'm starting to think its nearly impossible to hit CAS4 w/ 4 gigs.

ive had 4-4-4-10 up to 1040 with 4GB of gmh, but my gmh is strange it acts like gkx and dosnt do cas5 until u get to 1150mhz, it took 1.6V NB

4x1GB has no problem with cas4 but 2x2GB cant do it


whats the best 2.2V ram cas3 that people are getting