Testing / comparing : Intel D975XBX2 / Asus P5B DX ***56K WARNING***

[pH(x)]

I still have stupid EIST problem...

Are you doing the following procedure:
Shut Down > Remove AC Cable > Discharge PSU/Mobo Powerdown > Set BIOS Failsafe Jumper > Insert AC Cable > Flip PSU Switch > Boot Back Up

Then change critical settings hit F10 to save, repeat the above procedure to save settings in BIOS properly?

[LaMpiR]

Are you doing the following procedure:
Shut Down > Remove AC Cable > Discharge PSU/Mobo Powerdown > Set BIOS Failsafe Jumper > Insert AC Cable > Flip PSU Switch > Boot Back Up

Then change critical settings hit F10 to save, repeat the above procedure to save settings in BIOS properly?

Tnx. It works.

[finance_coder]

Is there any way to undervolt the CPU any more than 1.28 volts?

I put an E2160 in this board, and would like to reduce power consumption as much as possible. Stock voltage is 1.325, so 1.28 isn't much savings. Looks like other folks around the net have taken the voltage down considerably on this processor.

I'm currently on BIOS version 2770.

Thanks!