**Official ASUS Striker II Formula Discussion/Review/Overclock/Guide/BIOS Thread**

[hmetro24]

memory 2.1v
vid 1.38v in bios that boot to windows at 4.2ghz
other volts are auto
+30mv
+30mv
ddr2 ref +30mv
ddr2 ref
ddr2 ref

[holystarlight]

memory 2.1v
vid 1.38v in bios that boot to windows at 4.2ghz
other volts are auto
+30mv
+30mv
ddr2 ref +30mv
ddr2 ref
ddr2 ref

Try this

Loadline Calibration Enable

SLI memory Disable

CPU Voltage (Find whatever stable for you on this one, Every CPU is different)
PLL Voltage 1.60
DRAM 2.0
FSB Termination Voltage (VTT) 1.40
North Bridge Voltage 1.40
South Bridge Voltage 1.50
1.2v HT Voltage 1.35
Bridge Core AUTO
GTL ref CPU 30+
GTL ref NB 20+
ref DDRII Controller AUTO
ref DDRII Controller Channel A AUTO
ref DDRII Controller Channel B AUTO
With some luck this should work, if you use the correct voltage for your CPU start with 1.38v as you done, and if not stable then work your way up a little with the voltage untill it is stable.