My New Toys AM2

[msimax]

You got any barcelonas for your board msimax?

not yet, but i can get b3s from newegg with a price penalty
but if they clock like phenoms my old board was good till about 292htt which would give me 3358mhz with this

[LIKMARK]

Ok, I'm in the process of getting the /b rev of the board and a couple of b3 barcas. It will take a copule of months though as I can't spend that much money in a month. (My wife would kill me!! )

You volt modded your board didn't you?

Edit: I'm aiming for the 2350's though. Getting 8 cores to 2,7/2,8GHz would be VERY nice chrunch wise

[msimax]

no volt mods needed yet

[msimax]

hey likmark when you start your build use these to give you more htt head room over ddr667

http://www.ewiz.com/detail.php?name=T800RB1G

[msimax]

final temps running for 2 1/2 hours no load

[LIKMARK]

hey likmark when you start your build use these to give you more htt head room over ddr667

http://www.ewiz.com/detail.php?name=T800RB1G

Thanks for the heads up msimax. I'm going for 2*2gb 800Mhz modules. Bought a barcy today, seller said it was a b3, but im pretty sure it is a b2. well well. I'm gonna put a couple of Shanghais into it anyways when they comes. Didn't get the board though so now I'll have to buy a brand new one, and there is no one selling them in Norway.. ebay shop here i come..

Brr.. Nice temps BTW

[msimax]

been getting bored lately waiting for my board to come back from rma so i got something to kill time. I might get a 9850 friday to play with

[msimax]

im using a +3600 for now hit a wall at 3200mhz coldbuggin with htt

[msimax]

this board doesn't read cold temps

[LIKMARK]

Wich board is it? K9a2 plat? The board coldbugging or cpu?
BTW will you get a WS or a WS/B board back from rma? Read about one guy getting a WS/B back for his FX's. You think you could use WS bios on WS/B board and vice versa? I've heard somone say that the WS/B board supports split plane for Opterons, but I can't get it confirmed.

[msimax]

its a platinum board and if they send a ws/b its ok if it has a socket bios then i can swap bios on the fly

edit- the chip is coldbugged

[LIKMARK]

its a platinum board and if they send a ws/b its ok if it has a socket bios then i can swap bios on the fly

edit- the chip is coldbugged

weren't your current bioschip soldered?

Damn can't wait to get my hands on the board. Damn you customs for being so slow

Probably have to buy some crappy ram first until I get my hands on some 2*2gb 800mhz reg/ecc ram *hard to find* .

[msimax]

i thought they just ship you another board out of the junk box so i had hopes of getting one with a socket bios

[msimax]

i just picked up a 6000+ ccb8f 0751 apmw gonna test it tonite see what it do.
gas is to high to be driving with no where to go so im going to abuse this chip all weekend

[msimax]

this stepping is good for gaming and screenies but sucks for stability test.
right now im forcing a burn in to see if that helps

[msimax]

ok gonna be running benches all weekend hopefully without trouble first some numa sandra with crucial new disgusting ram

[Rammsteiner]

Someone has too much bandwith.

Nice results

[msimax]

povray single thread next multi thread



http://forums.mydigitallife.info/showthread.php?t=172

[msimax]

[msimax]

[msimax]

[msimax]

i run the rest of that test when im sleep takes to long

[msimax]

[msimax]

x264 HD Benchmark

x264 HD BENCHMARK RESULTS
Please copy/paste everything below the line into the forum post to report your data
^^^^^^^^^^^^^^^^^^

Results for x264.exe v0.58.747
encoded 1442 frames, 64.05 fps, 3904.67 kb/s
encoded 1442 frames, 66.35 fps, 3904.67 kb/s
encoded 1442 frames, 66.07 fps, 3904.67 kb/s
encoded 1442 frames, 65.97 fps, 3904.67 kb/s
encoded 1442 frames, 16.73 fps, 3952.97 kb/s
encoded 1442 frames, 16.67 fps, 3952.97 kb/s
encoded 1442 frames, 16.57 fps, 3952.97 kb/s
encoded 1442 frames, 16.58 fps, 3952.97 kb/s

Results for x264.exe v0.59.819M
encoded 1442 frames, 66.73 fps, 3888.87 kb/s
encoded 1442 frames, 66.88 fps, 3887.01 kb/s
encoded 1442 frames, 66.73 fps, 3889.34 kb/s
encoded 1442 frames, 66.69 fps, 3887.25 kb/s
encoded 1442 frames, 17.41 fps, 3962.60 kb/s
encoded 1442 frames, 17.41 fps, 3962.72 kb/s
encoded 1442 frames, 16.13 fps, 3962.75 kb/s
encoded 1442 frames, 17.45 fps, 3963.30 kb/s


System Details
--------------
Name AMD Opteron 8224 SE
Name AMD Opteron 8224 SE
Codename Santa Rosa
Codename Santa Rosa
Specification Dual-Core AMD Opteron(tm) Processor 8224 SE
Specification Dual-Core AMD Opteron(tm) Processor 8224 SE
Core Stepping
Core Stepping
Technology 90 nm
Technology 90 nm
Stock frequency 3200 MHz
Stock frequency 3200 MHz
Core Speed 3500.4 MHz (14.0 x 250.0 MHz)
Core Speed 3500.4 MHz (14.0 x 250.0 MHz)

Northbridge NVIDIA nForce 570 SLI rev. A2
Southbridge NVIDIA nForce 570 SLI rev. A3

CAS# 5.0
RAS# to CAS# 5
RAS# Precharge 5
Cycle Time (tRAS) 18
Command Rate 2T
Memory Frequency 500.1 MHz (CPU/7)
Memory Type DDR2
Memory Size 2560 MBytes
Channels Dual

Windows Version Microsoft Windows XP Professional Service Pack 2 (Build 2600)

max VID 1.425 V
max VID 1.400 V
Voltage sensor 0 1.46 Volts [0x5B] (CPU VCORE)
Number of processors 2
Number of threads 4
Number of threads 2 (max 2)
Number of threads 2 (max 2)
L2 cache 2 x 1024 KBytes, 16-way set associative, 64-byte line size
L2 cache 2 x 1024 KBytes, 16-way set associative, 64-byte line size
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64
Package Socket F (1207)
Package Socket F (1207)

Temperature sensor 0 20°C (67°F) [0x45] (core #0)
Temperature sensor 1 0°C (32°F) [0x31] (core #1)
Temperature sensor 0 8°C (46°F) [0x39] (core #0)
Temperature sensor 1 10°C (49°F) [0x3B] (core #1)
Temperature sensor 0 42°C (107°F) [0x2A] (GPU Core)

[msimax]

http://service.futuremark.com/result...&resultType=13