Well, I've been able to boot this board with 4x 1GB of OCZ DDR3-1800 [running at 1600 with timings of 7-7-7-21 and voltage @ 1.90]; but as soon as Windows comes to the login screen it freezes. So far the highest clock I've been able to obtain using 4 sticks of RAM has been 1350Mhz with timings of 6-6-6-18 at 1.90v. I have not tried with just 2 sticks because I want to be able to use all 4 sticks. For now, I am content with being able to boot my PC at 450FSB and 1350Mhz on the RAM. I did a 32M calculation in SuperPI, but didn't have time to run it on OCCT yet. The PC is running on air cooling at the moment, but once I get it to where I want it and stablelize it, I will install the water cooling loop.

If anyone needs to know, my setup is:
Intel Q9450 running at 3.6GHz [vCore @ 1.20v on BIOS/1.168v on CPU-Z and OCCT; PLL @ 1.50v; FSB Termination @ 1.25v; NB @ 1.25v; SB @ 1.05v; everything else was left at AUTO]
OCZ DDR3-1800 Platinum Edition 1GB x 4 running at 1350Mhz [6-6-6-18, 1.90v]

I will mess around with it some more tonight; maybe try it with just 2 RAM sticks and see if I can get it to run at 450FSB and DDR3-1800. I know the RAM is capable of doing DDR3-2000, but I will not try that until I'm confortable with a stable 425-450FSB so that I can then install my water cooling loop on it.