New WR E8500@6206.85MHz

[DMH]

Your so close to 1M WR can't you run any timming on your mem lower?Is it already totally tweaked?If you bring up the frequency and the efficiency a little you'll have the WR

[DFectuoso]

More cat power and you get another WR!!!

[c1rcu1tburn3r]

Spi wr is impossible couse you can't set thight timings at those freq more than he done.
With a qx is different...

[Nulpunt]

Some nice clocking

[DMH]

Spi wr is impossible couse you can't set thight timings at those freq more than he done.
With a qx is different...

UNless he could find a DDR3 motherboard that could that kind of FSB,timmings real tight but maybe with a little more vdimm it might be possible(if he tries)

[Nordling]

To establish a record the cat has helped?

[G H Z]

Spi wr is impossible

Never say never when your talking about TJ

[duck]

#188-#205

Wow...
Looks very good, amazing freq and result

Thanks, M.Beier-san! regards

Very nice!

Thanks,SeLecT-san !

OMG
6080mhz SPI benchable
Fantastic work as always Duck-san
Soo close to the new Pifast WR also

Thank you!
I'm very glad.

OMG
Sadly "Error in computation" in PiFast
Edit: Ah, you added a second PiFast-run. Congrats for that one, too!

ahaha...It was pointed out by you and noticed.
Thanks

Impressive work once again Duck-San...

Also quite aggressive timmings...

Keep tearing it up...

Thanks,Oliver

Beautiful Pi Fast and SuperPi Duck-san.

Thanks,Monstru-san

show us 32M at 630x9.5 1:1 CL4-4-4

OK! I try it. But it will be very hard..?・・hahaha

OMG duck-san

Thanks,diezel-san !

That image made me chuckle so i sent it to my friend;

-"whats with the toliet roll and the cat?"

Congratulations on the great result

Thanks,acidpython-san !

Excellent work, Duck, beautiful!

Thanks,massman

Amazing m8...anyway i'm coming
My Commando burned, i'm searching for something good like yours!
I've 2 E8500 over 6ghz but i was chipset limited, same freq for each E8500, around 6050mhz...
Keeeeeeeeep pushing it!

Oh, that's too bad...
Me too, it's dead well, but is not dead recently.

I hope that you can get M/B that 2v setting in Vcore this time!
It runs well in proportion to a rise Vcore.
And try to cool nb to an extremity in LN2.
Keep it up!

very good result

It is a E8500 which it purchases yesterday. Q744A876 (2V/0A)
With you CPU it is a same batch code?

http://www.nowpug.com/bbs/data/multi.../oc_Image1.jpg
http://www.nowpug.com/bbs/data/multi.../oc_Image3.jpg

OC Windforce-san, how have you been?
Yes, I have.
http://www.xtremesystems.org/forums/...&postcount=183
But I have sold it because Pi did not run with high clock.

It is Q748A369 2V /3A this time.

is this your best E8500 ever tested ??
well done Duck San!

Thanks erickwok. How are things?

I bought it recently and is not best.
This is ordinary MAXCLOCK, but can run pi with high clock.
Therefore I like it.

More cat power and you get another WR!!!

Thanks,DFectuoso-san !

Some nice clocking

Thanks,Nulpunt-san !

Your so close to 1M WR can't you run any timming on your mem lower?Is it already totally tweaked?If you

bring up the frequency and the efficiency a little you'll have the WR

Spi wr is impossible couse you can't set thight timings at those freq more than he done.
With a qx is different...

Thanks！ DMH-san


At first pifast.
I succeeded for 634 X 9.5=15.69s, but failed in a save.
I used P965 Strap Tweker. However, 1coreBoot does more loss of time than 2coreBoot in pifast.
To my regret, this E8500 can show a performance only in 1coreBoot.
I checked that was able to run it to 642 X 9.5 on that day with eyes.
As for super-pi,
I checked that I could run 642×9.5 on that day. I did not save it and did not use P965 Strap Tweker.
The OS is slow winXP not server 2003, because I did not aim at a record on that day. I checked a performance of some E8500s which bought newly recently.
So I have E8500 of the high performance than this E8500, I am going to aim at a record in the near future. But I will not use P965 Strap Tweker.
It is very effective in Pi first and Pi-8M, but there is not the so big effect in 1M. Besides, clock is hard to go up.
M/B and memory are important not a CPU.

I don't yet see whether WR is possible in E8500 which I used this time,
but it seems that 7.4 or 5s is certain if I try it with a purpose as super-pi even if I do not use Strap Tweker.
I intend to make score better a little.

[massman]

Will you be running a 32M in the future as well? Monteboy did quite good already with ddr2

[duck]

New WR

CPU　Core2Duo E8500 Q746A474
M/B　ASUS COMMANDO #2 75MC****(BIOS 1605)
Memory　Team Xtreem PC2-9600 X 2
HDD　IBM IC35L080AVVA07(P-ATA)
Power Supply　SilverStone ZEUS-1200
(+12v COMBINED by OVERCLOCK WORKS JAPAN)
Vcore　2.02v Vmch 1.80v Vddr2 2.60v　
Vfsb,Vsb=AUTO
OS　Windows XP
MEM　1:1　CL5-5-5-5

1core boot 610MHz　Temp -180C

[massman]

Unbelievable ... . You truely are the king of Mount Megahertz!

By the way, you're cat is looking very relaxed ... it doesn't know what you just did, doesn't it? :p

[antoine76]

You should test in single channel

so, very good results

[C Stat B]

Almost 100% on a 3.16GHz CPU

[Solarfall]

duck ...DUDE your mad !!!!!!!!!. i love it fantastic job

[DMH]

Those mems at 66Mhz:O
Now wann see 6270Mhz with two cores
congrats

[PPInDaHouse]

I wouldnt say that 660mhz on rams are impressive, but 660FSB yes it is

great work Duck-san

[Hyperhorn]

Virtuoso & focussed!

[Pt1t]

Congratulations for this new WR !

Those commando and E8500 are very impressive

[makaka]

impressive overclock .nice cpu voltage :-) and super pi result .

Congrats

[OC_Windforce]

Congratulations ~!
Graet Great~! duck-san
6.3G go go go~

[Monstru]

Great work! Even if you don't seemed too convinced by it, that SuperPi 1M WR is not that far, actually it is pretty close. Congrats Duck-san

[xwards]

wow nice clock

[MaSell]

I think it's time for 3D action Duck-san

[PcCI2iminal]

its a serious damage hehehehe
only 6FSB left to go --->100%
congrats again Duck-san

[s0lid]

grants Duck!

some how that cat is distracting, so focused to ur rig