**Official ABIT IP-35 Pro Review/Overclock/Guide Thread**

[redphoenix]

first of all, you will need actual higher vcore than what cpuz is reporting...you will need to get it up to 1.50 or 1.52 ACTUAL vcore to get it into windows...there is a big disparity between what the bios set vcore and what is actual...your only thrust is to set the bios vcore or Uguru vcore to give you what you need in actual terms..don't get wrapped around the axle about what is set in the bios or uguru

Yeah I read about vdroop, I just got it to show 1.51 in BIOS voltage readings and it still wont boot into windows.

cpu is very hot now, I think that is my limiting factor. I disabled C1E and EIST.

Right now im testing 400x6, stable as hell. Im going to keep bumping it up and see what i can find.

[dstedman]

For the sound, check the little metal box that contains the ps/2 mouse port. If you squeeze it with your fingers, does it go away? I had the same problem (though it wasn't real loud), and I ended up putting a binder clip on it to quiet it down mostly...