371MHz fsb on an ABIT IC7-G.....NOT BAD(again).... :)

[hipro5]

Yeap.........371MHz fsb on an ABIT IC7-G Mobo.......

.....AND I think I'm about to "solve" the 5:4 and the 3:2 ratio problem on this Mobo........I'll know one of these days.....


ALL these are ON AIR on Northbridge with a Thermaltake Tiger heatsink........I'll put a Peltier on it one of these days and I think that I'll "break" the world record which is 378MHz IF I remember well.......


Anyways ........Show is on..........

[hipro5]

Clock gen............Take a look at AGP/PCI.......You CAN'T go high if you have SATA HDD's on INTEL's southbridge chipset and locked AGP/PCI at 66/33MHz........NO WAY.......

[hipro5]

S-Sandra Memory bench with high fsb and 3:2 ratio........

[Av3ng3r]

Congrats, Very nice results man

[hipro5]

.......and my new pi-fast on this Mobo........

ABIT IC7-G
Modded Prommie with R507 gas
2 x 256MB Kingston Value Rams PC2700(DDR333) with BH6 chips on board

[hipro5]

I can bench at 305MHz fsb with the 5:4 ratio till now and STILL moving on.........I think one of these days I'll found out why those ABIT's can't go higher than 280 - 290MHz average fsb's with the 5:4 ratio.......I'll post the "findings"..........I'll borrow a digicam from a friend of mine one of these days(haven't bought one of mine yet).......

[NapalmV5]

Damn, just got a headache. 371MHz FSB ? What's holding you back ?

[NapalmV5]

Originally posted by hipro5
I can bench at 305MHz fsb with the 5:4 ratio till now and STILL moving on.........I think one of these days I'll found out why those ABIT's can't go higher than 280 - 290MHz average fsb's with the 5:4 ratio.......I'll post the "findings"..........I'll borrow a digicam from a friend of mine one of these days(haven't bought one of mine yet).......

Hurry up hipro, solution is badly needed.

[spaceboy]

Awesome my Friend

[SPQQKY]

Is your P4 an engineering sample?

[hipro5]

Originally posted by NapalmV5
Damn, just got a headache. 371MHz FSB ? What's holding you back ?

Thanks guys........

I thing the memory controler is holding me back for the time been......

[hipro5]

Originally posted by spaceboy


Awesome my Friend

Thanks a LOT M8........

[hipro5]

Originally posted by SPQQKY
Is your P4 an engineering sample?

Yes it is.......On ABIT I can use the x8 - x12 - x13 - x14 - x15 - x16..........On an ASUS and EPOX I can NOT use the x8 multi......

[hipro5]

Originally posted by NapalmV5
Hurry up hipro, solution is badly needed.

I'm trying about a month now........

[Jupiler]

Amazing scores, hipro5.
Hope you'll break the record.

Now we know why you've been so quiet over the past weeks.

[shidokanjohn]

You crazy scientist
Now you must find a good card and play with
AND find the 5/4 problem cause promie is on the way....
good job again as usual

[hipro5]

Originally posted by Jupiler
Amazing scores, hipro5.
Hope you'll break the record.

Now we know why you've been so quiet over the past weeks.

Thanks Jupiler........I was "quiet" over the past weeks not only for this but cos I'm very busy with my work too.....

[MCWB]

Insane. Incredible.
Fark! Nice one Hipro!!


Go the bold!

[hipro5]

Originally posted by shidokanjohn
You crazy scientist
Now you must find a good card and play with
AND find the 5/4 problem cause promie is on the way....
good job again as usual

I'm trying my friend.........

[Geforce4ti4200]

oh insane and even at 3:2 at such high fsb youd need good ram that can handle the speed

[hipro5]

Originally posted by MCWB
Insane. Incredible.
Fark! Nice one Hipro!!


Go the bold!

Thanks M8.......Always bold........

[hipro5]

Originally posted by Geforce4ti4200
oh insane and even at 3:2 at such high fsb youd need good ram that can handle the speed

Fortunately I've got GOOD Ram to handle the fsb......At 1:1 I'm at 263MHz maxed out.......

[Iolao]

Wow, killer bandwith. Are you going to extreme mod the board to reach higher fsb?

[JiMk]

Good job hipro5

[Vagouridis]

Once again good job Hipro5 , keep on modding the abit , and like a friend of mine said Always be careful !!!!!

Originally posted by JiMk
Good job hipro5

Καλα μιλαμε εαν εισαι και εσυ εδω τοτε αστα να πανε....αλλα βλεπω μονο 6 ποστ , τσπ και ελεγα γιατι ειχα φαγουρα πρωι πρωι στο δεξι και κατι .....