A Positive Look at the Antec Nine Hundred (900) Case

[DoNER90]

Hey , The past days I swoped out my radiator and did some more wire work

here is my PC , I know that it doesnt look as hot as your guys PC's but I love it.

[outbreak42]

Saludos Modding Freaks. I have to say, you guys have some sexy A900's there

I myself own one, and I've done some modding on it inspired by this famous thread. I've done the slot loading drive mod, cable management at the back of the tray but I'm not done with everything.

I was wondering if any of you knew where to get a second 120 fan holder for the back of the drive cage. I contacted Antec regarding this, however they told me that didn't have any available. And I've been unsuccessful searching for it.

Here's what I've done till now:




Slot Loading Mod:
- Panasonic UJ-875 slimline slot loading Super Multi DVD burner.
- PA-CDST / APA-LS248 SATA to slim CD-ROM adapter (http://www.orbitmicro.com/global/sat...er-p-4633.html)
- Velcro to hold the drive in place inside case.

Cable Management:
- Knockout Punch from Harbor Freight

[Sturdius]

Does anybody know where I can get extra rubber plugs from the back of the computer? I'm talking about these things, if my explanation isn't doing the trick.
I'd really like to use these to line the holes i drilled in my case, but I can't find them anywhere. Thanks.

[CadESin]

Does anybody know where I can get extra rubber plugs from the back of the computer? I'm talking about these things, if my explanation isn't doing the trick.

I'd really like to use these to line the holes i drilled in my case, but I can't find them anywhere. Thanks.

I would try a auto parts store, ask them for the gromets used to run wires though the firewall of a car. They come in many diffrence sizes so be sure to bring, or know how big the stuff you are going to route though the hole is.

[Sturdius]

I would try a auto parts store, ask them for the gromets used to run wires though the firewall of a car. They come in many diffrence sizes so be sure to bring, or know how big the stuff you are going to route though the hole is.

Yeah, I've been through that route. I bought some 1/4" tubing and slit it down the middle to line the holes I cut. I really want the factory Antec grommets though, and I didn't see them on the "Spare Parts" section of the Antec website. Thanks, though. If anyone on this forum has any to spare, I'd gladly buy them.

[=>WiLL<=]

I like how you accented the "ANTEC Design" on the bottom floor of the case. How did you do it? Sanded the tops of the lettering after it was painted? I have to do that to mine soon.

MetalRush - I loosed the stock window and cut out a full 15"x15" window. I'll get a picture of it soon.

[outbreak42]

I like how you accented the "ANTEC Design" on the bottom floor of the case. How did you do it? Sanded the tops of the lettering after it was painted? I have to do that to mine soon.

1 - I put blue painter's tape on top of the design making sure it took the shape of the letters.
2 - Grabbed a X-acto knife and cut around the letters.
3 - Painted inside of case as normal.
4 - Carefully took out the tape letters.

If you mess up the letter shape while taking off the tape, you can fix it with the X-acto knife.