Results 1 to 25 of 3536

Thread: Official DFI LanParty UT X38-T2R(and LT) Discussion/Review/Overclock/Guide Thread

Threaded View

  1. #11
    Xtreme Member
    Join Date
    Dec 2004
    Posts
    455
    Rinaun, others:

    Well from what i read...on each given system..tweaking GTL needs a LOT of reboots and testing. In other words: You have to find your own values which COULD be off +/- 15 from all posted tables..and test, test, test. Even the charts can only give halfway advice.

    The other Q would be about what a good VTT is for a given FSB...according to Anandtech they set VTT as high as 1.6 for 400+....i myself keep VTT always a little under VCore...and Vcore for me is 1.46 right now with FSB 442 stable at 1.42 VTT. I consider everything over 1.45 "dangerous"...in terms of possible CPU degradation over time with everything higher. Its just my own "safe zone". Other opinions might vary. If you go through a new system every few months, maybe 6 months life-span per system ... dont hesitate and push 1.55 - 1.6..and then in a few months just dump whatever you have and get new CPU anyway---

    For 475 FSB i would definitly go higher than 1.3...but thats also just my own guessing.
    Last edited by flexy; 04-26-2008 at 01:25 AM.
    Q6600 g0 L741 1.4V@35xx-> 8x44x FSB - 5:6 333/800- 2x2gb OCZ XTC Plats@53x mhz - dfi lp X38 TR2, Ultra Xtreme 120 - W7 64Bit - NV GTX275 - Corsair 520 (blew up) -> Toughpower 750W

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •