Asus Rampage Formula Memory Compatibility & OC Info

[Stelios]

Yesterday i tried my 1300mhz teamgroup . The run perfectly fine with 2.2V at 1300 CL5 . No problems with any dividers .
The red cellshocks did better with CL4 though .... 2.48V bios and 1200CL4 stable .

Bios 0219 here .

[slugzkea]

The white slots seem to allow a higher OC. I wish they woulda mentioned that in the damn manual.

with the blue slots, I was walling at 1134mhz but now i'm at 1164mhz.

here are the results:

[xplicit666]

just wondering if anyone have used any kingston ram on the board, cause im grabbing one soon and was hoping to use 2 sets of kingston hyperX KHX9600D2K2/2G.

[slugzkea]

I checked the QVL for rampage and those sticks are not listed. Neither were mine though, but micron D9's are QVL for rampage.

At this point it doesn't matter what 9600 memory you're going to use, 1200mhz is not achievable with this board yet due to immature bios releases.

with bios 0207 i was only able to achieve 1132mhz.

with bios 0308 I am able to achieve 1164mhz.

So it is getting closer....I would check with kingston and ask what chips they use because this board is super duper picky with mem.

[3oh6]

At this point it doesn't matter what 9600 memory you're going to use, 1200mhz is not achievable with this board yet due to immature bios releases.

first off, it is 600MHz or DDR2-1200...no such thing as 1200MHz DDR2.

second, are you forgetting my screenshot above. D9GMH/D9GKX have absolutely no problem clocking well past 600MHz on this board....you simply can't with your kit of memory. stop blaming the board, there is nothing wrong with it.

[ZenEffect]

first off, it is 600MHz or DDR2-1200...no such thing as 1200MHz DDR2.

second, are you forgetting my screenshot above. D9GMH/D9GKX have absolutely no problem clocking well past 600MHz on this board....you simply can't with your kit of memory. stop blaming the board, there is nothing wrong with it.

exactly

http://i48.photobucket.com/albums/f2...76/binorma.jpg

here is the kit i used. works perfectly out of the box.

http://www.mushkin.com/doc/products/...ail.asp?id=632
HP2-8500
996578 (2x1GB)

*edit* found who makes the chips
Elpida A2

[slugzkea]

I ment DDR2, duh of course it's not native 1200mhz.

[slugzkea]

exactly

http://i48.photobucket.com/albums/f2...76/binorma.jpg

here is the kit i used. works perfectly out of the box.

http://www.mushkin.com/doc/products/...ail.asp?id=632
HP2-8500
996578 (2x1GB)

*edit* found who makes the chips
Elpida A2

Why is your everest showing x38? is your board a maximus flashed to a rampage?

Beware, there are differences. a NATIVE rampage board is not the same as a maximus, or a maximus that has been flashed to a rampage.

[slugzkea]

first off, it is 600MHz or DDR2-1200...no such thing as 1200MHz DDR2.

second, are you forgetting my screenshot above. D9GMH/D9GKX have absolutely no problem clocking well past 600MHz on this board....you simply can't with your kit of memory. stop blaming the board, there is nothing wrong with it.

If the D9 chips have no problem clocking that high how come my D9's are walling?

are you using a native rampage or a flashed maximus?

and what other kits have you tried (9600)?

[foxvengeor]

mm good topic. First sorry for my english , but i've a big issue with my rampage and my (single sided :'( ballistix pc8500).

I've test alls bios and always the same problem.

Xeon X3360@3.81 mhz 1.34V FSB 450
NB 1.41V

RAM @ 1080mhz 2.20V 5-5-5-15 (tested with 1:1 ratio 900mhz)

Stable on memtest with a boot CD
Stable on memtest XP

Unstable on vista memtest + OCCT and games... Every hours got a BSOD : Memory management

[xnaron]

I am finding this board really picky on 800mhz+ memory. I can't find the QVL for this board for 1066Mhz ram. Can someone point me to the link? I have tried some patriot and some corsair memory and haven't been able to get the board stable at either 800 or 1066 (and this was with 1066 ram). I am now using two 1GB sticks of 667mhz kingston and the board is rock solid.