Quote Originally Posted by The0men View Post
Don't give up on the chip just yet.... Mine was the same, in the same board, untill I give like 1.8+ volts to the CPU PLL, try that, then see how it does. also have 1.4v VTT and 1.5v on the 1.2v HT. Also I have 1.64v set in bios for NB... try those and see how it does. Only using +30mv on the GTL ref's
you suggest 1.8v pll? i understand that's your opinion but most chips doing 1.8vpll for 24/7 will not last long. try every GTL reference before you increase VTT and PLL for your overclock...