Originally Posted by c1rcu1tburn3r
You're right, i know...maybe is my vdrop trimmer that have somethings...i'll try it with ma multimeter
On my other commando i can go more than 2v without problems... i'll try when i'll load my dewar again...2 or 3 days
The cause is because the vcore trimmer value is high in the OVP.
The resistance value which is set raise.
In my case set about 9.8Kohm
ex) Bios set 1.75V + vcore trimmer(9.8Kohm) = 1.984V
Reply With Quote
Bookmarks