Sandy Bridge 2500k @ 4.5ghz 1.28v | MSI p67a-gd65 B3 Mobo | Samsung ddr3 8gb |
Swiftech apogee drive II | Coolgate 120| GTX660ti w/heat killer gpu x| Seasonic x650 PSU
QX9650 @ 4ghz | P5K-E/WIFI-AP Mobo | Hyperx ddr2 1066 4gb | EVGA GTX560ti 448 core FTW @ 900mhz | OCZ 700w Modular PSU |
DD MC-TDX CPU block | DD Maze5 GPU block | Black Ice Xtreme II 240 Rad | Laing D5 Pump
Hey Guys just got a spanking brand new E8500 from tigerdirect yesterday. this thing is stable at 1.5V load 4.4ghz...can prime @ 4.5ghz, but it fails @ 30 minutes, and can boot into windows @ 4.6ghz and play games or run benchies. has been running prime so far for 12+hrs. will call fully stable once it hits 16hrs. and oh i need 1.29Vcore to run stable @ 4.0ghz. i think i got an average chip...considering its an E8500. my 24/7 overclock will be 4.0ghz at 1.29vcore.....
E8400@3.6ghz 1.11v |Asus P5E3 deluxe bios 1001| 2 giga Cellshock DDR3 12800@1696mhz|Samsung Syncmaster 2232BW 22' | Asus 8800 GTS² 512 TOP|Western digital sata 500 SE16 | Blu Ray LG GGW-H20LRB| Creative X-fi platinum|Nexus 600W | case Coolermaster 1000 "Storm"
Xeon E3110@3.6ghz 1.15v|Asus P5K premium "blackpearl" bios 503|2 gigas Cellshock DDR2 8500 |Twintech 9600 GT|nec 1970 GX|Gigabyte 3D aurora case
E8400(Q804A249) valid@ 4.8 ghz 1.56v
Xeon E3110 (Q746A534)valid@ 4.79 ghz 1.59v real bios AIR /superpi 1m@9.968 .. under vista
My Ibanez 540S " Saber "overclocked with Di Marzio and Sperzel
My cousin on drums Hi Brian !
mine degraded again.
ASUS P5K-E // E8400 Q746A519
G.Skill F2-8000CL5D-4GBPQ
LC 550W GP// XPERTVISION 9600GT
Last edited by zlojack; 04-18-2008 at 11:28 AM.
RIG 1 (in progress):
Core i7 920 @ 3GHz 1.17v (WIP) / EVGA X58 Classified 3X SLI / Crucial D9JNL 3x2GB @ 1430 7-7-7-20 1T 1.65v
Corsair HX1000 / EVGA GTX 295 SLI / X-FI Titanium FATAL1TY Pro / Samsung SyncMaster 245b 24" / MM H2GO
2x X25-M 80GB (RAID0) + Caviar 500 GB / Windows 7 Ultimate x64 RC1 Build 7100
RIG 2:
E4500 @ 3.0 / Asus P5Q / 4x1 GB DDR2-667
CoolerMaster Extreme Power / BFG 9800 GT OC / LG 22"
Antec Ninehundred / Onboard Sound / TRUE / Vista 32
I got me a Q807A050, tray version, today.
Seeing some good results with Q807 batches, I was expecting some from it.
Guess I have a dud.
Only does 3750 at 1.296V, what a POS.
At 3800 and 1.296V, Prime crapped out after 10 seconds.
Just tested it for 1 hour, as it wasn't worth wasting my time on it.
Got my E8200 back in.
Whatever, better luck next time.
Rig #1
Gigabyte P67A-UD4 trying to figure out this POS board
2600k @ ?????
2x2Gb GSkill RipJaws-X 1333 (7-7-7-21)
ATI 5850
Coba Nitrox 750W
Watercooled with HK 3.0 CU, Watercool GPU-X³ 5870 Nickel, PA120.3, Laing Ultra with XSPC top
Rig #2
DFI UT P35-T2R (0317 bios)
E8200 @ 4000 (1.216V) / 4100 (1.248V) / 4200 (1.296V) / 4300 (1.344V)
2x2Gb Chaintech Apogee GT PC2-8500
Powercolor 4870
Corsair 520HX
Watercooled with HK 3.0 CU, EK-FC4870, Feser tripple, Laing Ultra pump
RIG 1 (in progress):
Core i7 920 @ 3GHz 1.17v (WIP) / EVGA X58 Classified 3X SLI / Crucial D9JNL 3x2GB @ 1430 7-7-7-20 1T 1.65v
Corsair HX1000 / EVGA GTX 295 SLI / X-FI Titanium FATAL1TY Pro / Samsung SyncMaster 245b 24" / MM H2GO
2x X25-M 80GB (RAID0) + Caviar 500 GB / Windows 7 Ultimate x64 RC1 Build 7100
RIG 2:
E4500 @ 3.0 / Asus P5Q / 4x1 GB DDR2-667
CoolerMaster Extreme Power / BFG 9800 GT OC / LG 22"
Antec Ninehundred / Onboard Sound / TRUE / Vista 32
It was the only Q807A i found (by luck).
Checked in 4 stores and most of them were :
Q802Axxx (3 tray versions, 2 boxed)
Q805Axxx (about 5 trays)
Q808A120 (2 boxed)
Also found a couple of Xeons 3110.
Q805A165
Q806A227
think I might give a Xeon a try.
Rig #1
Gigabyte P67A-UD4 trying to figure out this POS board
2600k @ ?????
2x2Gb GSkill RipJaws-X 1333 (7-7-7-21)
ATI 5850
Coba Nitrox 750W
Watercooled with HK 3.0 CU, Watercool GPU-X³ 5870 Nickel, PA120.3, Laing Ultra with XSPC top
Rig #2
DFI UT P35-T2R (0317 bios)
E8200 @ 4000 (1.216V) / 4100 (1.248V) / 4200 (1.296V) / 4300 (1.344V)
2x2Gb Chaintech Apogee GT PC2-8500
Powercolor 4870
Corsair 520HX
Watercooled with HK 3.0 CU, EK-FC4870, Feser tripple, Laing Ultra pump
PC : Asrock Z68 Extreme3 Gen3 + Intel Core i5 i2500k + 2 x Asus HD6870 DirectCU + 2x2GB PC12800 G.Skill Eco 7-8-7-24 + Creative X-Fi Titanium PCIe + Scythe Mugen 3.
Digicam : Pentax *istDL2 + Pentax smc DA 18-55mm F3.5-5.6 AL + Cosina F3.5/100mm Makro.
Heimkino : Samsung LE-46B450 FullHD + Arion AF-4000HDCI + Onkyo TX-SR505E + Quadral Quintas 5.0 + Heco Victa 25A.
Most impressive, xxx (damn', I forgot your name )
4700 with only 1.480V,
I'm still angry at myself for not getting one of those from HPM.
But as usual, it's a crapshoot. I might have gotten a dud one too, you never know.
But I still have my nice E8200, hehe.
Rig #1
Gigabyte P67A-UD4 trying to figure out this POS board
2600k @ ?????
2x2Gb GSkill RipJaws-X 1333 (7-7-7-21)
ATI 5850
Coba Nitrox 750W
Watercooled with HK 3.0 CU, Watercool GPU-X³ 5870 Nickel, PA120.3, Laing Ultra with XSPC top
Rig #2
DFI UT P35-T2R (0317 bios)
E8200 @ 4000 (1.216V) / 4100 (1.248V) / 4200 (1.296V) / 4300 (1.344V)
2x2Gb Chaintech Apogee GT PC2-8500
Powercolor 4870
Corsair 520HX
Watercooled with HK 3.0 CU, EK-FC4870, Feser tripple, Laing Ultra pump
alo
here is mine E8400 after some tests:
E8400 @ 4662mhz 9x518
P5K-E @ 1012
TG Elite 2x2GB e @ DDR1036 2,10v
nothing special but not so bad at all either
What'dya think fellas? Try for higher OC?
Last edited by resyn; 04-18-2008 at 11:52 PM.
:: Abit iP35 Pro vModded ::
:: Intel e8400 Wolfdale @ 4.5GHz ::
:: G.Skill 4GB (2 x 2GB) PC2-8500 1066 ::
:: Antec Neopower Blue 650w ::
:: MSI NX8800GTS 512MB (G92) @ 820/2000/1000 ::
:: Ultra Chilltec Thermoelectric Peltier ::
:: Antec Nine Hundred ::
My 1st quick try, meager compared to others, but an improvement on my e6850 @ 3.8 that gave me ~13s 1M SP. And at $480 for the cpu ($220), mobo($60), ram(50), hsf(55), and psu(95), I'm pretty happy so far.
e8400 Q806A320 1.1125v VID 1.3625v BIOS 1.328v idle 1.312v load
ga-p35-ds3l rev. 2.0
corsair dominator 2x1Gb 1066
zalman 9700 led
ocz gameXstream 700w
temps around 37C / 46C idle 42C / 50C load (core 0 / 1) and 23C ambient
11.672s 1M
18 hours ORTHOS
19 hours Prime
Last edited by F0rr3sTT; 04-23-2008 at 02:02 PM. Reason: update orthos
No... your good. Nice low volts. You dont want to ruin that. I never got my 1.375 back after messing around trying to go higher... but if you are like me you will want to max this sucker out and see what it can do. I did suicide runs with 1.6v 3dmarking trying to break my own record. It's fun!
EVGA 780i--E8400 @4.05Ghz--TRUE--EVGA GTX760 4GB--4X2GB PC6400 REAPER 4-4-4-15-2T @800mhz--150 RaptorX--PCPC 750 silencer--Antec 900
My Orthos Beta always give me a wrong speed way off. For example if i'm at 3.8 it indicate 4.5 ghz ... very weird..
Q9650
Asus P5Q-D Bios 1406
280 GTX FC Block
2x2gb OCZ Flex II PC2 9200
Water Cooled/ Iwaki MD20/ D-Tek Fuzion
XFX 850 Watt
OWC SSD
Well, I couldn't help myself, so last night i went 525 x 8.. Here we are :
Gonna keep orthos running for awhile longer, that 1.340 is with 1.3850 set in the bios. First vCore I went with after upping from 450 x 9..
:: Abit iP35 Pro vModded ::
:: Intel e8400 Wolfdale @ 4.5GHz ::
:: G.Skill 4GB (2 x 2GB) PC2-8500 1066 ::
:: Antec Neopower Blue 650w ::
:: MSI NX8800GTS 512MB (G92) @ 820/2000/1000 ::
:: Ultra Chilltec Thermoelectric Peltier ::
:: Antec Nine Hundred ::
Think that's the best chip here at XS atleast
what a golden one!
Intel i7 920@ ???| Inno3D 8800GT OC Edition | 3x1 Corsair 1600 DHX | DFI UT-X58 | TT ToughPower 850W
Watercooling: D-Tek FuZion V2, DDC Ultra Plexi top, PA120.3, MCW60, Ek's Res.
Got My P5E and E8400 running at 4005
All stable on 1.39 bios say 1.45
Rig #1
Gigabyte P67A-UD4 trying to figure out this POS board
2600k @ ?????
2x2Gb GSkill RipJaws-X 1333 (7-7-7-21)
ATI 5850
Coba Nitrox 750W
Watercooled with HK 3.0 CU, Watercool GPU-X³ 5870 Nickel, PA120.3, Laing Ultra with XSPC top
Rig #2
DFI UT P35-T2R (0317 bios)
E8200 @ 4000 (1.216V) / 4100 (1.248V) / 4200 (1.296V) / 4300 (1.344V)
2x2Gb Chaintech Apogee GT PC2-8500
Powercolor 4870
Corsair 520HX
Watercooled with HK 3.0 CU, EK-FC4870, Feser tripple, Laing Ultra pump
Rig #1
Gigabyte P67A-UD4 trying to figure out this POS board
2600k @ ?????
2x2Gb GSkill RipJaws-X 1333 (7-7-7-21)
ATI 5850
Coba Nitrox 750W
Watercooled with HK 3.0 CU, Watercool GPU-X³ 5870 Nickel, PA120.3, Laing Ultra with XSPC top
Rig #2
DFI UT P35-T2R (0317 bios)
E8200 @ 4000 (1.216V) / 4100 (1.248V) / 4200 (1.296V) / 4300 (1.344V)
2x2Gb Chaintech Apogee GT PC2-8500
Powercolor 4870
Corsair 520HX
Watercooled with HK 3.0 CU, EK-FC4870, Feser tripple, Laing Ultra pump
Golden!
I'm getting new ram next week, can't wait to see what this thing can bench
[SIGPIC][/SIGPIC]
3DMark06: 20974
Bookmarks