ocz cryo-z news?

[Charles Wirth]

Ive topped out at 5.175Ghz for benching, 5Ghz should be 24.7 stable.

[thebanik]

^^^^Fugger I think i have missed ur earlier posts, but wud that be a 45nm QX or a E8400/8500???? In any case thats an amazing performance from a 300$ cooling kit.

[ZenEffect]

^^^^Fugger I think i have missed ur earlier posts, but wud that be a 45nm QX or a E8400/8500???? In any case thats an amazing performance from a 300$ cooling kit.

i believe its a e8400/8500. im not too sure on its applicaton on a quad core... though it would be nice if it were possible... mabye i can get one and have it re-tuned/modded it to handle a quad... still would be cheaper than getting a mach ii gt or vapochill in the end... and would have better performance.

Fugger, what is on that cats head in your avatar? anti cia aluminum foil cap? i really dont know but its friggin funny thought.

[RyderOCZ]

Fugger is on E84/8500 last I knew.

Quad results (65nm) are in this thread.

[ZenEffect]

Fugger is on E84/8500 last I knew.

Quad results (65nm) are in this thread.

ahh... no new developments then. so ryder, in your opinion would you say that it is quad capable or would further upgrades be necessary?

[Jor3lBR]

Is it safe to use this cryo-z inside a closed case (modded case of course Lian Li)?

[[XC] Synthetickiller]

I'm blind and only see 45nm quad results. There's q6600 results?

[RyderOCZ]

I'm blind and only see 45nm quad results. There's q6600 results?

The only Quad results in this thread are mine and that is with a QX6850 which is 65nm, same as a Q6600: http://www.xtremesystems.org/forums/...4&postcount=78 and post #61

CPU-z correctly identifies it as 65nm as well.

So yes, you are blind

No offense intended....

[[XC] Synthetickiller]

Thanks RyderOCZ.

That is interesting that anything more than 1.45v or so is not stable.

Kind of makes me worry. My q6600 requires 1.55v for 3.78ghz which isn't anything special. That basically translates to my current water cooling set up being better than this unit. 1.58v = 11*C? That doesn't sound good. I'm not interested in moving to a dual core as I'd probably use the phase to benchmark and do some gaming on.

RyderOCZ, don't worry about offending me. This is the internet. Good times for all! I need a break honestly, I can't comprehend anything anymore, lol. I appreciate that post.

[sonofander]

soon?

[Jor3lBR]

Thanks RyderOCZ.

That is interesting that anything more than 1.45v or so is not stable.

Kind of makes me worry. My q6600 requires 1.55v for 3.78ghz which isn't anything special. That basically translates to my current water cooling set up being better than this unit. 1.58v = 11*C? That doesn't sound good. I'm not interested in moving to a dual core as I'd probably use the phase to benchmark and do some gaming on.

RyderOCZ, don't worry about offending me. This is the internet. Good times for all! I need a break honestly, I can't comprehend anything anymore, lol. I appreciate that post.

I dunno where you took those info but certainly wasn't from Ryder's test...

He used 1.504v for the Prime95 tests and also toped at 1.58v... The voltage you see was due to Vdroop.

His cpu was giving up not the unit.

[[XC] Synthetickiller]

I dunno where you took those info but certainly wasn't from Ryder's test...

He used 1.504v for the Prime95 tests and also toped at 1.58v... The voltage you see was due to Vdroop.

His cpu was giving up not the unit.

I thought that the unit going to 11C was too much load on the compressor?

What is the upperthreshold of the unit temp wise?

[Planet]

I thought that the unit going to 11C was too much load on the compressor?

What is the upperthreshold of the unit temp wise?

Shouldnt be an issue.

Thanks RyderOCZ.

That is interesting that anything more than 1.45v or so is not stable.

Kind of makes me worry. My q6600 requires 1.55v for 3.78ghz which isn't anything special. That basically translates to my current water cooling set up being better than this unit. 1.58v = 11*C? That doesn't sound good. I'm not interested in moving to a dual core as I'd probably use the phase to benchmark and do some gaming on.

RyderOCZ, don't worry about offending me. This is the internet. Good times for all! I need a break honestly, I can't comprehend anything anymore, lol. I appreciate that post.

The colder you get the less voltage you need for the OC. So you could prolly get up more 4ghz with the same voltage.

[Jor3lBR]

Shouldnt be an issue.



The colder you get the less voltage you need for the OC. So you could prolly get up more 4ghz with the same voltage.

Thats what I'm talking about, thanks for the post!

There is noway a medium to good phase unit can be less effective to a 24/7 or OC setup then a WC kit.

Are you guys kidding?!

[[XC] Synthetickiller]

Shouldnt be an issue.



The colder you get the less voltage you need for the OC. So you could prolly get up more 4ghz with the same voltage.

Thats what I'm talking about, thanks for the post!

There is noway a medium to good phase unit can be less effective to a 24/7 or OC setup then a WC kit.

Are you guys kidding?!

Thanks guys. I'm still learning.

[Jor3lBR]

I'm officially without my PC now waiting on this unit

Sold all my WC stuff and no news on when the Cryo will hit the sales floor . Ryder any news from the North Pole?

I hope this doesn't turn out like the last time it was advertised to 'almost' be launched.

[GripS]

I'm officially without my PC now waiting on this unit

Sold all my WC stuff and no news on when the Cryo will hit the sales floor . Ryder any news from the North Pole?

I hope this doesn't turn out like the last time it was advertised to 'almost' be launched.

From Ryder in the News section on this product:

I will make sure to get advanced info the day before they are going up on the site.

Ok?

Do not go over there every day this next week or so and look, we are waiting on some certification paperwork.

[geoffsthaboss]

is it safe to say that if you dont snatch one of these up right away theyll be history? im quite interested but not sure if im ready for the plunge

[yokomo]

and how do i get on in UK ??
got the cash just show me where ! 300usd is about 150 gbp aka less than my WC loop cost !

[Jor3lBR]

and how do i get on in UK ??
got the cash just show me where ! 300usd is about 150 gbp aka less than my WC loop cost !

OCZ already said they won't sell a 220v version nor ship to EU. Only in US.

Otherwise you would have to paypal someone here to get one for you and ship it somehow (30kilos is a lot to ship)!

But the units are not out yet and there is no news on when they can came out.

[yokomo]

no fair !
and big shame really as they would sell as fast as they could make them at those prices.

[geoffsthaboss]

really want to see an in depth review

[RyderOCZ]

really want to see an in depth review

Charles is working on that.
http://www.xtremesystems.org/forums/...&postcount=124

[itznfb]

I'm officially without my PC now waiting on this unit

Sold all my WC stuff and no news on when the Cryo will hit the sales floor . Ryder any news from the North Pole?

I hope this doesn't turn out like the last time it was advertised to 'almost' be launched.

bad idea.... i called it in the news thread that we wouldn't see these before the end of april. i think that was optimistic.

[TheGoat Eater]

waiting still - performance for 300 USD