Case closed, these chips hate the cold. The colder they get, the more vcore they need to be stable. Just changing the heater setting for the vapo from 100% to 0% required an extra 2 voltage notches, so instead of 1.1825v it wanted 1.2125v to run at 2.7ghz because it got like 5C colder. I might have to build an intel system to justify not selling my vapo now...
Not much to say right now.
got today my new hardware (Phenom 9850 BE & Asus M3N-HT Deluxe), its my first time with AMD & oc
HW Pics...
short test with stock cooler
http://valid.x86-secret.com/show_oc.php?id=345569
single channel 1 512 sticK?Originally Posted by Chri$ch
got today my new hardware (Phenom 9850 BE & Asus M3N-HT Deluxe), its my first time with AMD & oc
HW Pics...
short test with stock cooler
http://valid.x86-secret.com/show_oc.php?id=345569
can you try DC and post back your results...
yes, first time was singlechannel because the asus wont boot with my pc2-8500 sticks
and i tried it with one pc2-6400 stick.
at this time prime run with 2 x 512MB PC2-6400 sticks in dualchannel mode @ 250 x 10.
http://valid.x86-secret.com/show_oc.php?id=345600
regards
chris
Behavior that you've experienced with memory isn't isolate casefriend of mine, bencher it self, also had unbelievable headache with memory… mobo just refused to work in DC mode, or with high speed sticks (HyperX 1200 if I remember correctly)
Adobe is working on Flash Player support for 64-bit platforms as part of our ongoing commitment to the cross-platform compatibility of Flash Player. We expect to provide native support for 64-bit platforms in an upcoming release of Flash Player following the release of Flash Player 10.1.
Hey man! My 9850 BE has the same batch as yours.got today my new hardware (Phenom 9850 BE & Asus M3N-HT Deluxe), its my first time with AMD & oc
HW Pics...
Not sure I want to mention this but... AMD chips were actually designed and optimized for lower voltages at the mainstream frequencies [for such uarch/fabrication] right since the early beginning. Hence it won't be odd to find they love voltage only in a low range and do not scale past it unless process tweaked. As Execs at AMD have explained, critical path delays were increased for this but need decreasing for higher clocks.
Also, AMD now has the 2.5GHz Barcelona 2360 SE retailing at 105W TDP: http://www.amd.com/us-en/Corporate/V...l?redir=CPPR01
So they now [finally] have 1.7G, 1.8G, 1.9G, 2.0G, 2.1G, 2.2G, 2.3G, 2.4G and 2.5G retailing in that segment - all of which were set to release by December '07 had there not been this TLB bug and a reason why they lost much profit over increased costs.
Any details on nV 780a?
I get 2800mhz @1.23vcore stablySo I am happier then a Pig in
SuperMicro X8SAX
Xeon 5620
12GB - Crucial ECC DDR3 1333
Intel 520 180GB Cherryville
Areca 1231ML ~ 2~ 250GB Seagate ES.2 ~ Raid 0 ~ 4~ Hitachi 5K3000 2TB ~ Raid 6 ~
I think is getting more and more obvious that B3 is really big progress compared to B2... just remember how painful was to bring up 9600BE past 2.5 with 1.4+V and look now... 2.8 is doable on default voltage!I get 2800mhz @1.23vcore stably
Adobe is working on Flash Player support for 64-bit platforms as part of our ongoing commitment to the cross-platform compatibility of Flash Player. We expect to provide native support for 64-bit platforms in an upcoming release of Flash Player following the release of Flash Player 10.1.
Posting Permissions
Reply With Quote
Bookmarks