Official ASUS X38 Boards: P5E, P5E3 - Info/BIOS Thread

[Mtrx]

I have tried the vdroop mod in my p5e and now I got some confusing results with the vcore of the quad. Before the mod, at 9*333 the q6600 needed 1,264v and 1,224v in idle-load to get stable with prime95, and now needs only 1,200v that is the same in idle and load after the vdroop mod, so I thought the same should happens at higher speed and the quad should need less vcore but don´t.. L. At 8x400 before was 1,288-1,248v and now is stable with 1,264v, and at 8*425 before was 1,376-1,328v and now needs 1,352v, so the temps under load are a bit higher.

Well, after few days of some tuning I found the answer to my own question.. there wasn´t a problem with the vcore of the Go at higher speed after the vdroop mod, just needed to raise the vmen and nb a bit and the quad is stable now at 3,4 with 1,336v, it´s getting better

http://img526.imageshack.us/img526/3...agen122vn1.jpg

http://img526.imageshack.us/img526/8...agen123va9.jpg