ocz cryo-z news?

[ZenEffect]

Tony and I work from home...you will not ring and get either of us.

Who do you need to ask? I just posted everything you need to know... are you doubting what I posted?

I IM'd my boss (VP) and asked him what the price is....there it is. Fugger also posted the same info as I did, because he talked to my boss

well, since you are here and the info i got from calling in was obviously incorrect... does it come with a heating element for the back of the mobo?

[ZenEffect]

see why i want to talk to someone over there who knows what is going on?
(not to say that you dont, its just that the answer is instantanious on the phone)

[Flinch]

I'm really interested to see how this cools a quad, that's going to be the deciding factor for me.

[RyderOCZ]

Come on....you can't give me more than 20 minutes to find the answer for you?

Not sure why the urgency of an instant answer, you can't even buy it yet because it is not on the site for sale, it may be a week before the site is up.

When I get the info, I will post it.

Thank you.

[7499richard]

don't use a heating element, insulate your mobo...

why do you want to add heat to something your trying to cool? Insulation works perfectly fine, there are good stickies here on how to do it properly

[RyderOCZ]

Yes the heating element is included.
Thank you.

[WesM63]

Damn guys give Ryder a break. I haven't see this posted on any other site, so I think its nice of them to give us a heads up.

[[XC] 2long4u]

This thread is going to be locked up faster than a whore on MLK if you guys keep it up.

[cadaveca]

So, how long do I have to hit F5 for to order?

[ZenEffect]

Come on....you can't give me more than 20 minutes to find the answer for you?

Not sure why the urgency of an instant answer, you can't even buy it yet because it is not on the site for sale, it may be a week before the site is up.

When I get the info, I will post it.

Thank you.

sorry, i have a bad habit of wanting things NOW.

the urgency of an instant answer is as follows.

what would take me a 20 min in a phone call could result all day on the forum, and since i waste my time at work (well, i shouldnt say waste... my job sucks and i do everything that i can to avoid working) speedy response is preferred... plus if the guy is good, i can ask for him again when it comes to puchase time (i would like to verify my order via phone after it is placed... not that i dont trust anyone, its that im poor and have to make sure exactly where my money is going)

no offense or anything, its just that i find talking to someone on the phone is a bit more efficient than my poor typing and spelling skills.

*see took me like an hour to put this up because of my retarded job... i handle... THE MAIL*

[wdrzal]

Whomever it was...was not informed... I just gave you exactly what it is going to be.

Or was planning on ordering a few and adding a nice mark-up and reselling them before the word got out...........

In any instance ,seems like you got the scoop from the horses mouth....That a great price ....

[RyderOCZ]

Or was planning on ordering a few and adding a nice mark-up and reselling them before the word got out...........

In any instance ,seems like you got the scoop from the horses mouth....That a great price ....

[BlueAqua]

Looks very promising so far, thanks for the heads up. I wouldn't mind trying one out to compare against my aging Chilly1.

[hecktic]

Fugger,

Please please please also test it on a quad chip like an X3350 Xeon or something in that area.

Thanks

[Sam__]

So, how long do I have to hit F5 for to order?

had me LOLing for a bit

[hecktic]

had me LOLing for a bit

more like ROFL

[RyderOCZ]

This is my first boot with the quad.

CPU-z is correct, 1.60V set in bios.

[ZenEffect]

This is my first boot with the quad.

CPU-z is correct, 1.60V set in bios.

lapped? *curious*

either way, im sold.

[road-runner]

What about full load temps?

[safan80]

$500 - $550? No.

$299 direct from OCZ +$35 S/H anywhere in the US... watch www.ocztechnology.com.


Sorry for nothing concrete, but that is the best I can give with the tools I have so far.

Thanks for posting! I'm going to order one.

[Planet]

Would order If I didnt have my cascade and single stage under way

[dinos22]

it's a great deal

i am surprised you guys didn't add a bit more buffer

these would probably still sell really well even at $399 i'm sure

wish you guys luck
if this takes off hopefully you'll have some cascades for sale for sub 1K heheh

[RyderOCZ]

Last one for me tonight...almost 2am, bed time.

CPU is not lapped.

Full load temps are here, as best I can give them to you. Voltage set in bios is 1.500V for all these.

Core's 0/2 got warmer than the other 2. Upon removal of the Evap, I did have too much paste on the CPU and it spilled over to one side. Big plus... no water though
I will re-mount tomorrow and hit it some more to either confirm or refute these temps.

EDIT: Ambient temp in the room is 67F / 20C

See ya guys

[aspire.comptech]

Nice to see this finally coming to fruition.

I remember what was it, 3 years ago at the first Showdown lan when you guys had the demo unit.

[{.bLanK} GoD]

If I had a dollar for every spam post in this thread I'd have enough money to buy a couple of pints. Some of you have no respect for the the thread starters at all. We don't care if you "lol'ed"

Nice to see the Cryo-Z nearly ready Ryder.
If your motherboard reads negative temps, it'd be nice to see what speedfan says about the temps. I don't trust core temp as far as I can throw it (with sub zero temps).
How the hell you make any money from selling them so cheap I have no idea.
Interesting that T1 reads the same between your loaded and unloaded pictures, and 5mins under load isn't a true load test. At least an hour @ full load when you get the time would be good.
Nice work, they look very tidy. Have a drink on me and give Tony a pat on the back.