P965StrapTweaker

[monteboy]

trebao be dobiti jos jedanu plocu
ako bude mogla da radi na 620+ FSB ovaj procesor nece imati nikakvih problem sa superpi-a na toj frekvenciji

moj moze nekih 5820 za spi32m a videcemo na 790i sta je moguce....
bice interesantno .....

[HKPolice]

bump
this should be stickied

[little_scrapper]

With relation to the JP PMem Strap Tweaking solution :
http://www.i4memory.com/showthread.php?t=4268

I program a little utility to set Strap values automatically.

If you start the Application without Parameter the default Values for the
five Bytes will be as follows :

R1, FED14030h => 06
R2, FED14034h => 10
R3, FED1403Eh => 03
R4, FED1403Fh => 24
R5, FED14040h => 09

On my Asus Commando works very well , also on FSB above 600MHz.

To set custom values for the R1-R5 Adresses use this Command Syntax:

P965StrapTweaker.exe R1 R2 R3 R4 R5

Example:

P965StrapTweaker.exe 06 10 03 23 09

If you want to run it each time Windows starts , you can put this custom Parameter start also in a Batch file and copy it in the Autostart Folder.

Use at your own risk!

I have the GA-965P-DS3 rev3.3 w/ E4300 and I cannot boot reliably over about 370FSB or so. I think I have come across exactly 2 people in the last year or so that could do 400 or better with this combo. Seems this board absolutely hates E4300's. Is there anything I can do aside from buying an E8400? Which I intend to do in the near future. I really really really am dying to see what this board can actually do.

[ghost_recon88]

This work on chipsets other then P965?

[monteboy]

This work on chipsets other then P965?

only P965 !

[Malk4vi4n]

Any chance it works in a P965 (mobile) chipset notebook???

[monteboy]

Any chance it works in a P965 (mobile) chipset notebook???

try it ! and report here

[TiMiN8R]

I have the GA-965P-DS3 rev3.3 w/ E4300 and I cannot boot reliably over about 370FSB or so. I think I have come across exactly 2 people in the last year or so that could do 400 or better with this combo. Seems this board absolutely hates E4300's. Is there anything I can do aside from buying an E8400? Which I intend to do in the near future. I really really really am dying to see what this board can actually do.

I know what you mean, I have an S3 rev. 3.3. Tried with a E4300, E2160 and a Celeron E1600ES. Never boots above 370. Even stranger, it won't boot with 320 or 350 but will with 330. Memset doesn't seem to work either, everytime I change just the smallest thing, CPU-Z will stop showing info on the memory tab and if I restart Memset it will show only half the timings and then incorrect at that. Decided to ditch the board alltogether and get a P5K.
So I won't be testing this nice looking app. Would have if I had known about it sooner.

[ziddey]

Just did a before and after on my dfi p965-s.

before:
---- MBench (C) ver 1.0 (Feb 2002) ----
---- System memory benchmark ----
---- www.x86-secret.com ----

Intel P6 processor (CPUID = 6f6) @ 3589.1MHz
Instruction set support : MMX SSE SSE2

Access latency 53.5 ns (192 clocks)

Read datarate (INT) 6114 Mb/s
Write datarate (INT) 2760 Mb/s

Read datarate (MMX) 6531 Mb/s
Write datarate (MMX) 2752 Mb/s

Read datarate (SSE) 6774 Mb/s
Write datarate (SSE) 7634 Mb/s


after:
---- MBench (C) ver 1.0 (Feb 2002) ----
---- System memory benchmark ----
---- www.x86-secret.com ----

Intel P6 processor (CPUID = 6f6) @ 3589.1MHz
Instruction set support : MMX SSE SSE2

Access latency 58.5 ns (210 clocks)

Read datarate (INT) 6017 Mb/s
Write datarate (INT) 2628 Mb/s

Read datarate (MMX) 6232 Mb/s
Write datarate (MMX) 2716 Mb/s

Read datarate (SSE) 6729 Mb/s
Write datarate (SSE) 7372 Mb/s



although I gotta check my bios settings since I used to be at:

---- MBench (C) ver 1.0 (Feb 2002) ----
---- System memory benchmark ----
---- www.x86-secret.com ----

Intel P6 processor (CPUID = 6f6) @ 3589.1MHz
Instruction set support : MMX SSE SSE2

Access latency 51.3 ns (184 clocks)

Read datarate (INT) 7453 Mb/s
Write datarate (INT) 3386 Mb/s

Read datarate (MMX) 7990 Mb/s
Write datarate (MMX) 3309 Mb/s

Read datarate (SSE) 8206 Mb/s
Write datarate (SSE) 8100 Mb/s





mode1/mode1/fast/fast

[Spyrus]

Any chance it works in a P965 (mobile) chipset notebook???

try it ! and report here

I hope it would work but since that mod is for over 400fsb
maybe there is no difference on mobiles with 200fsb?

[diezel]

i get this report can not open the driver
whit the tweaker

[HKPolice]

i get this report can not open the driver
whit the tweaker

I get the same thing. Used to work on XP64 but after I reinstalled, i get this

[monteboy]

New Version and new Application for strap tweaking ->
http://www.ocxtreme.org/forumenus/showthread.php?t=3469

[unclewebb]

Thumbs up for this wonderful tweak.
Getting some memory bandwidth numbers that the DDR3 guys with their new boards would be envious of!
I need NB=1.65 volts to maintain stability but who cares. The chipset hasn't caught on fire yet.