Post your 45nm Quad OC with full BIOS settings + volts + temps

[RunawayPrisoner]

FPO/Batch# may not help. But anyway:

X3350 @ 3.80GHz (475 x 8)

CPU features:

C1E on/off (doesn't matter)
SpeedStep on/off (doesn't matter)
All other settings on except for CPUID Max Limit.

BIOS settings:

Clock Over-charging Mode: 0.80v

CPU volt: 1.3625 (1.320-1.336v real, 1.280 - 1.304v under max load. Vdroop modding effects wearing off so... I guess this is to be expected. I'll try modding again soon, though)
CPU volt ref: 0.63x
PLL volt: 1.58v
FSB Term volt: 1.32v
NB volt: 1.55v
NB volt ref: Auto
SB volt: Auto

RAM:

Kingston HyperX 950MHz dual-channel 4-4-4-12
DRAM volt: 2.36v

Motherboard: ASUS P5E-VM HDMI
CPU cooler: Thermaltake Big Typhoon (no VX)
Case: Antec 900

Temps as reported by Real Temp:
Idle: 19/17/17/17
Load: 46/44/42/42 (using Prime95 small FFTs)

Temps as reported by CoreTemp:
Idle: 32/31/29/29
Load: 60/58/55/55

CPU VID: 1.1250v

Voltage requirement for different clocks (stable):

333 x 8: 1.105v
400 x 8: 1.120v
450 x 8: 1.225v
475 x 8: 1.304v
490 x 8: 1.358v
500 x 8: 1.422v (can only validate and/or run a quick SuperPI 1M)
505 x 8: ???? (POSTable at 1.368v)
510 x 8: ???? (POSTable at 1.398v)
520 x 8: ???? (POSTable at 1.412v)
525 x 8: ???? (POSTable at 1.444v)

Edit: 530 x 8: board hangs before it completes the boot. :p My guess: this thing can go much much higher... probably up to 540.