I tried everything,1.35v is MAX.I set with RBE 1.4,but it is 1.35v.Set 1.3 it is 1.3...
I tried everything,1.35v is MAX.I set with RBE 1.4,but it is 1.35v.Set 1.3 it is 1.3...
same here.Originally Posted by quake6
ati tool can be used to raise volts even higher... so my theory on this is the proper hex value for any volt above 1.35 is unknown.
Current Status - Testing & Research
Ok thanks
My VRM cooling
This card is dieing quickly. Max stable is 700core
>i5-3570K
>Asrock Z77E-ITX Wifi
>Asus GTX 670 Mini
>Cooltek Coolcube Black
>CM Silent Pro M700
>Crucial M4 128Gb Msata
>Cooler Master Seidon 120M
Hell yes its a mini-ITX gaming rig!
how flat is that heatpipe on the vrms? i totally ignored the pulse chips on mine...
i installed small heatsinks from petra's where your heatpipe is. i cleaned off the thermal tape and used non conductive thermal adheasive from arctic silver... i think i was arctic silver alumina ceramique adheasive
vrms dont get above 85 now
Last edited by ZenEffect; 03-25-2008 at 10:10 AM.
Current Status - Testing & Research
Such high clocks with VRM above 85? OMG. I know my card is not the best because the stock vgpu is 1.2v, but my card can't clock high, even while my VRM never goes above 50c according to Rivatuner.
>i5-3570K
>Asrock Z77E-ITX Wifi
>Asus GTX 670 Mini
>Cooltek Coolcube Black
>CM Silent Pro M700
>Crucial M4 128Gb Msata
>Cooler Master Seidon 120M
Hell yes its a mini-ITX gaming rig!
stock vrms usually hover around 100c full load...
Last edited by ZenEffect; 03-25-2008 at 10:25 AM.
Current Status - Testing & Research
ownage, what water cooling system are you using? I'm looking into getting a new cooling setup, but am a n00b when it comes to water cooling.Ok thanks
My VRM cooling
This card is dieing quickly. Max stable is 700core
Asus P5Q
Core 2 Duo E8400 Wolfdale C0
BFG GTX260 MaxCore OC @ 684/1476/1242
4x 1GB OCZ DDR2 800 4-4-4-4-12
2x 160GB Excelstor RAID 0
Thermaltake Purepower RX 600W
Windows 7 Build 7100
pump: Swiftech mcp655
reservoir: Swiftech MCRES-Micro
radiator: HWlabs black-ice gt stealth 240.
fans: 2x Yate-loons medium (noisy sons of b!tches, i don't like them)
cpu block: Swiftech Apogee GT universal.
gpu block: D-tek Fuzon GFX
The radiator is one heck of a bottleneck but still i can hold my gpu below 50c when high overclocked with 1.35v.
You should take a thick triple radiator (360) for optimum cooling performance. A swiftech mcr320 would be a goo choice.
Last edited by ownage; 04-02-2008 at 05:08 AM.
>i5-3570K
>Asrock Z77E-ITX Wifi
>Asus GTX 670 Mini
>Cooltek Coolcube Black
>CM Silent Pro M700
>Crucial M4 128Gb Msata
>Cooler Master Seidon 120M
Hell yes its a mini-ITX gaming rig!
Anyone here using the hd2900 Pro with the accelero xtreme?
Here the fans aren't starting on their one, so everytime I start the PC I've to kick-start the fans by hand... .
Kick start how exactly? What are your temps now btw? And how was the install?
Also, where did you get it?
Thanks.
Dark Star IV i5 3570K | Asrock Z77 Extreme4 | 8GB Samsung 30nm | GTX 670 FTW 4GB + XSPC Razer 680 | 128GB Samsung 830 Apogee HD White | 140MM UT60/120MM UT45/120MM ST30 | XSPC D5 V2
I've to start the fans by hand... . Probably they don't get enough Voltage to start on their own.
My card is running at 800/850mhz, idle Temp is 49, after a while of 3dmark06 it's around 67 (in ccc). With stockcooler Temps were 61 idle, 87 load.
Installation was ok, but the cooler is really huge. My mainboard is a XBX2, and there it's blocking two S-ATA Ports.
The cooler is available in some German online shops, I ordered it from one of them.
Posting Permissions
Bookmarks