Official DFI LanParty UT X38-T2R(and LT) Discussion/Review/Overclock/Guide Thread

[Effet]

dfi board not too crazy for d9gkx
when you get yours you will find out
i can do 1250mhz with d9gmh 2.2v
but with d9gkx had a hard time @1150mhz 2.32v
but you can do 1080mhz 4-4-4-12 2.3v
i personnaly dont like goin over 2.26v on d9s

Hmm..ok. I got mine yesterday and I set the Vdimm to 2,35v, which is the intended volt at 1150MHz, and I ran them at 1280MHz fine. Will try higher clocks and I'll post screens later on.

[zsamz_]

Hmm..ok. I got mine yesterday and I set the Vdimm to 2,35v, which is the intended volt at 1150MHz, and I ran them at 1280MHz fine. Will try higher clocks and I'll post screens later on.

i just tested mine in p35c-ds3r n they did 1226 with 2.22v
i couldnt do 1055+ with 2.32v in the x38

[Jor3lBR]

New BIOS for the 'bold' ones:

http://www.dfi.com.tw/Support/Downlo...FLAG=A&SITE=US

[Effet]

Anyone tried to flash a x38 to x48 with the 03/20 bios? Results?

[zsamz_]

New BIOS for the 'bold' ones:

http://www.dfi.com.tw/Support/Downlo...FLAG=A&SITE=US

dont worry i gonna try it verry soon and will report back

edit:ok i loaded it i see nothing different in performance over first bios
btw i used winflash was lazy lol

edit2:i dont like the new bios system reboots n posting code errors