BIOSTAR TA770 A2+ AM2+/AM2 AMD 770 ATX at the Egg

[Cisco Kid]

I wouldnt use the Intranet flash if my life depended on it ...A floppy is safer than that!...What if the connection goes down in middle of flash or some wierd stufff...


I use USBstick or Floppy or Burn file to CD....But never Internetflash ,its real iffy..

I am flashed up to the 228 bios now I just figure where I start,. I ran the tlb exe fix.

I got questions guys. Check my thumbnails out. Why does CrystalCPUID show the cpu running 11x230 = 2520 yet cpuz shows the multi at 5.5 x230 = 1265. I have the tlb patch enabled. I was in my bios I upped vcore by .037 which i plan to drop to either .012 or additional .025. I plan to lower mem timings as well to 4,4,4,12. I have mem set to ddr667 in bios I left the HTlink at 1800 in bios and ht frequency at auto in the TA770 A2+ bios. What is difference between "ganged and unganged"? Should I select a specific value for HT frequency in bios, should I select DDR800 in bios over the 667 setting. System has been priming for last 30 minutes with vcore at max of 42 with my Freezone CPU tec cooler on lowest setting



Well update system primed for over 5hrs rock solid, today i upped fsb to 234 left everything else the same and decreased voltage to additional .025 over default. I disabled the tlb patch and cpuz still shows cpu at half speed that crystal cpuid shows. CNQ/Smart fan optio is disabled in the bios, searching around for throttling to see if there is any setting such as that as well in the TA770 bios but can not seem to find anything, anyone else got ideas?