P965StrapTweaker

[monteboy]

With relation to the JP PMem Strap Tweaking solution :
http://www.i4memory.com/showthread.php?t=4268

I program a little utility to set Strap values automatically.

If you start the Application without Parameter the default Values for the
five Bytes will be as follows :

R1, FED14030h => 06
R2, FED14034h => 10
R3, FED1403Eh => 03
R4, FED1403Fh => 24
R5, FED14040h => 09

On my Asus Commando works very well , also on FSB above 600MHz.

To set custom values for the R1-R5 Adresses use this Command Syntax:

P965StrapTweaker.exe R1 R2 R3 R4 R5

Example:

P965StrapTweaker.exe 06 10 03 23 09

If you want to run it each time Windows starts , you can put this custom Parameter start also in a Batch file and copy it in the Autostart Folder.

Use at your own risk!

[lior307]

I also have a commando what should i do to use this program ??

[monteboy]

I also have a commando what should i do to use this program ??

1. set fsb in Bios above 400MHz
2. Boot in Windows
3. start Everest Cache & Memory Benchmark
4. Make a screenshot of the result.
5. run P965StrapTweaker.exe
6. start Everest Cache & Memory Benchmark again
7. Make a screenshot of the Result.

Example :

Without P965StrapTweaker :


After P965StrapTweaker run

[Spyrus]

You changed 1:1 strap 400 to 1:1 strap 333?

[monteboy]

You changed 1:1 strap 400 to 1:1 strap 333?

read more here :
http://www.i4memory.com/showthread.php?t=4268

[Spyrus]

This is only for windows, i thought i could use it to hack bios.
Can i tested it with P945?

[before]

ROOT THREAD -->>> http://www.ixtremtek.com/forums/showthread.php?t=76 !!!!

[monteboy]

ROOT THREAD -->>> http://www.ixtremtek.com/forums/showthread.php?t=76 !!!!

Give me a feedback of P965StrapTweaker dude when you test it.

[eva2000]

Nice tool

[HKPolice]

Doesn't seem to run in XP 64bit

[monteboy]

Doesn't seem to run in XP 64bit

Do you have an error like "missing tvicport.dll" ?

Than you have to copy the tvicport.dll in the /Windows folder
And the two sys files in /Windows/System32/Drivers and reboot

[HKPolice]

Do you have an error like "missing tvicport.dll" ?

Than you have to copy the tvicport.dll in the /Windows folder
And the two sys files in /Windows/System32/Drivers and reboot

No, I run it and nothing happens at all.

[dinos22]

try R4, FED1403Fh => 23 also

[monteboy]

try R4, FED1403Fh => 23 also

works for me only at 500 MHz fsb & need much NB Voltage


lijepo da i ti koristis moje alatkice
P.S oborih ti WR na E8500 u Spi32M , sta ces sad ?

[monteboy]

No, I run it and nothing happens at all.

do you measure the bandwidth , before and after runing P965StrapTweaker ?
I'll check this tomorrow under XP 64 but it should work.

[HKPolice]

do you measure the bandwidth , before and after runing P965StrapTweaker ?
I'll check this tomorrow under XP 64 but it should work.

Ok nvm, it works just no visual confirmation that the settings were applied.

So just to clarify, this sets the strap to 333FSB?

[HKPolice]

BTW, any way to adjust tRD value through these registers? memset's tRD doesn't work on most P965 mobos

[monteboy]

Ok nvm, it works just no visual confirmation that the settings were applied.

So just to clarify, this sets the strap to 333FSB?

There is no confirm because the idea is to put this tool in your autostart folder for setting the values on each windows start.



Normally the strap changes over 400 MHz , the utility applies the values from the 333FSB - strap.

[nonvtec]

I gotta check this out when I get home.. nice find!

[HKPolice]

This should be stickied, awesome free speed boost

[BlueAqua]

Cool I'll have to try this out. I'll report back with my findings.

[BlueAqua]

Ok I thought I'd just try this out. This is my first time changing the strap settings and I think it worked great and was easy. Thanks for making that small program and thanks to all that developed and learned how to do that. I know SuperPI 1M isn't a great test for that but I wanted something quick that would show me something.

Asus Commando

Here are my results:

Before Strap Changing:



After Strap Tweak:

[monteboy]

great boost BlueAqua.
I am very pleased to hear that you like it.

[Spyrus]

Do a 32m also where you can see even more difference and also winrar

[dinos22]

works for me only at 500 MHz fsb & need much NB Voltage


lijepo da i ti koristis moje alatkice
P.S oborih ti WR na E8500 u Spi32M , sta ces sad ?

trebao be dobiti jos jedanu plocu
ako bude mogla da radi na 620+ FSB ovaj procesor nece imati nikakvih problem sa superpi-a na toj frekvenciji