RocketFish(rebadged LianLi) Cases!

[ZOMGVTEK]

I am still trying to figure out where to put it, it is RIDICULOUSLY huge. I mean I could just pick up my 19" samsung LCD and stick it inside the case, along with both my cats, and a couple CD cases.

Hahaha... yea it is..

[hecktic]

Good job iandh!!

[mattd390]

I picked one up in flint, Mi for 77.99. The chick at the register told me if I bring in the stores number that had them for 47.99 I could get that price.. we will see though. Man, these buggers are friggin huge though! Kinda the exact opposite of my Lian Li a05b i just bought .

[Polizei]

Talked to an "Operations Manager" at a store in Avon, Ohio. They had this case for $67.99, when a store 30 minutes away has it for $47.99. I asked her if she would price match and she said no, because prices are based avaliability and demographics.

Lame.

[iadstudio]

Talked to an "Operations Manager" at a store in Avon, Ohio. They had this case for $67.99, when a store 30 minutes away has it for $47.99. I asked her if she would price match and she said no, because prices are based avaliability and demographics.

Lame.

I don't believe that. Best Buy isn't that organized about anything.

[Reefa_Madness]

My store doesn't have them on clearance and the dept manager wouldn't even discuss a discount.

I'll just have to wait a while and see if things change.

[p0tter]

I picked up one for 47.99 @ Bestbuy in Evanston, IL (on Howard Store #313). Its on clearance and its huge, dont take your 2 seater convertable like I did...

[Russian]

I picked up one for 47.99 @ Bestbuy in Evanston, IL (on Howard Store #313). Its on clearance and its huge, dont take your 2 seater convertable like I did...

Dude what car is that? an MR2?

[p0tter]

Yes, its a 2000 mr2 spyder.

I think you got a bad case that didnt go through qaulity control. The front door is solid, and edges are clean.

I just went and picked one up, them promptly turned around to return it! If this was made by Lian Li, their quality has severely dropped.

The issues that I found with this case are;
-Sharp, unfinished edges
-The left door did not fit properly, (after closing and tightening screws), the case twisted so it would not sit level but rocked side to side. I tried every way to get it to level, but as soon as the door was tightened down, the case body twisted.
-Top panel did not fit correctly in the front left side as well.

For the price, it's not a bad deal if you can find a good one.

[[XC] Synthetickiller]

I picked up one for 47.99 @ Bestbuy in Evanston, IL (on Howard Store #313). Its on clearance and its huge, dont take your 2 seater convertable like I did...

Nice case, nice car.

When you bring it home, could you take some pics of it next to another one of your cases for us? Pics make this good thread great!

[Russian]

Haha, awesome i still got it!

btw, i also had to return mine because one of the standoffs would not screw into the motherboard tray for the life of me, it was messed up and i ended up stripping it. But my exchanged one works great!

[p0tter]

Its about the same size as a Stacker w/ wheels. Wow, the camera shows the dirty filters

[Polizei]

Got one of the last two cases at my Best Buy. I'll get some pictures up in a bit of it compared to the side panel of my old Craptake Tsunami (er, Thermaltake) and my Silverstone Olympia power supply box.

I got some pictures of the case itself, what it comes with, and some pictures of the transfer from the Tsunami to this case. Bear with me though, taken with a cell phone.

[p0tter]

Is there a Lian Li window I can purchase?

[Russian]

Is there a Lian Li window I can purchase?

Yes, i think i have done enough research to verify it should fit on the PC-6/7 cases. Im not 100% sure since i havent purchased one... but it is deadly close to some of those cases size wize. I may buy one just to check.

[[XC] Synthetickiller]

I did not realize it was THAT big. I don't own a cosmos, so I can't compare directly, but I'm guessing this is bigger than a p180 eh?

[The Nemesis]

My store doesn't have them on clearance and the dept manager wouldn't even discuss a discount.

I'll just have to wait a while and see if things change.

The two stores nearest me didn't have them on clearance last week. But I checked today and now they do but for only $100.00 just keep checking they will all drop eventually.

[Russian]

I did not realize it was THAT big. I don't own a cosmos, so I can't compare directly, but I'm guessing this is bigger than a p180 eh?

MOOOOOOOST DEF.

[iadstudio]

agreed. From what i can tell it would have to be a pc 1000 or 2000 series case. However, there are a number of versions of this case series. Thsi is the one I suspect will fit:
http://www.performance-pcs.com/catal...c6c659d0009911
http://www.performance-pcs.com/catal...oducts_id=3713

I've been meaning to call Performancs-pcs and ask for specific specs on the panels they offer.

[Russian]

Not sure about that,

I was just checking and the 6x/7 series cases are mid tower and much smaller from what I can tell. Or are you talking about another typer case?

andyc

yeah, ive been looking at the dimensions, this is pretty much a PC-A10B or PC-A71B like stated before.. i was wrong.

[aiya]

just an update for people still trying to find this case in the los angeles area.

i purchased mine at the atwater BB in glendale for $71.99. they still had one more when i bought mine on 3/13.

i tried the pasadena store but they were out even thought their system says they have 3 instock.

city of industry store has 2 that i saw but still $119.99.

a buddy of mine grabbed the last one at the montclair store last night (3/15) for $47.99.

[Shift]

what ing bull everyone here practically gets it for $50 and I'm stuck at $120

this state I'm moving

[ZOMGVTEK]

what ing bull everyone here practically gets it for $50 and I'm stuck at $120

this state I'm moving

Im in NY and i got mine for $47...

Although it would appear you happen to be in NYC, thats a good 8 hours away, so.. yea...

Only 1 of the 6 or so stores within 50 miles had them at that price. Call around?

[Aleki]

a friend picked one up for me for 47. in comparison to my p180, there's no contest, the p180 actually smokes it.
the case cover feels light and flimsy, it looks like it will scratch easy. i feel like i have to be extra gentle with this case, which is not what i had in mind.
well i'll take a closer look at it tomorrow. maybe some fatmat and a thick coat of paint will keep the rattle down :/

[Garrett]

what ing bull everyone here practically gets it for $50 and I'm stuck at $120

this state I'm moving

Yeah right... moving... for a case lol
And by the way, in your sig you state the following
super expensive overpriced case