My custom 8800GT cooling solution

[noobzed]

Iandh, do you plan to make same HS but w/ copper ?

[iandh]

iandh, I wish you the best and hope things eventually slow down for you. I would very much like to see iandh ramsinks stay available. They are a quality product and fill a very much needed niche in the market. Nobody else seems to make bolt-on ramsinks and that is the only type I (and others, apparently) would consider placing on our video cards.

FWIW, it was a pleasure dealing with you. My order simply came right before a bad time in your life and you had much more important things on your plate to deal with. A ramsink and waterblock obviously isn't a life-or-death item so it is totally understandable that it was on the low end of your "To Do" list.

If you decide to make ramsinks for future generations of video cards, I would be interested in once again placing an order for a set (as long as you let me take a peek at your Day Planner first, of course).

Take care.

Refund sent. The reason why it is in two seperate parts is that the first half was beyond 60 days so I couldn't do a straight refund.

I do plan on designing these sinks for major card releases in the future, I have already discussed it with my machinist and with distributors and they are both interested.

You're a good guy Creig.

Iandh, do you plan to make same HS but w/ copper ?

Not at this time, the machining work involved would cost far too much in the quantities these are selling in.

[Kayin]

If you make a 3850 set, I need 4 sets. Consider that an order for them if you do it. 3870 has separate sinks, 3850 has one sink, so we need them.

[noobzed]

Iandh, is it possible to order directly from you quantities like 20 30 or even 40 of your custom HS ?
can you tell me the size ( Long and width of the HS and his weight too please ? )

[aspire.comptech]

Damn, 40 sets of heatsinks?

[noobzed]

Damn, 40 sets of heatsinks?

yes, and if you understand french, i am doing a group order for france, but would have the best prices incl ship price to france

http://forum.hardware.fr/forum2.php?...0&new=0&nojs=0

[aspire.comptech]

It's a beautiful country, I've been there a couple times.

[noobzed]

It's a beautiful country, I've been there a couple times.

[ps2cho]

I am sad to say I purchased this and it does not work with the MSI Cooler:


At the top of the heatpipes it hits the heatsink.

I guess I am doing to have to cut off the center part for the RAMsink and then grind down that section or find other bga sinks.

[svenyun]

Ya know, I don't get it.... ya'll keep complaining about not having your set... yet Petra's has them in stock:
http://www.petrastechshop.com/cu88cokitbyi.html

Your just stressing out iandh, so stop.

I would but I've already paid for a set in December and I'm still waiting (hint hint). I haven't bugged iandh too much because I know he's busy (I probably should have reminded him more often). He's been very easy to get in touch with at all times, I just think he forgot about me when the last couple shipments came in. I know I'll get them eventually so no worries.

[yonton228]

Any chance that this will work with the 9600GT? I cannot find any information about this and the 9600GT.




-yonton228/timmy

[iandh]

I would but I've already paid for a set in December and I'm still waiting (hint hint). I haven't bugged iandh too much because I know he's busy (I probably should have reminded him more often). He's been very easy to get in touch with at all times, I just think he forgot about me when the last couple shipments came in. I know I'll get them eventually so no worries.

Dude, you HAVE to be the last person that got caught up in the holiday madness. I handled what I thought were the last couple a few weeks ago but I had this nagging feeling that there was one more.

Black or Silver? I think I asked you already but I cleared out my PM box a couple weeks ago. Also PM me your address for faster processing (as if it could be any slower for you).

Any chance that this will work with the 9600GT? I cannot find any information about this and the 9600GT.




-yonton228/timmy

I am currently working on a getting a 9600GT version available, and likely a 9800GTX version as well.

[Kayin]

If you could, LMK status on our project. My anticipation is enough to make me jitter out of the seat. Oh, wait, that's cause I've got a drafting chair.

Anyway, can't wait to see it finished...

No rush, I'm almost kinda hoping to see like a worklog progression-this project has been my baby for a long time...

[iandh]

If you could, LMK status on our project. My anticipation is enough to make me jitter out of the seat. Oh, wait, that's cause I've got a drafting chair.

Anyway, can't wait to see it finished...

No rush, I'm almost kinda hoping to see like a worklog progression-this project has been my baby for a long time...

Cool cool, I've got yours and a couple other pet jobs for myself lined up this weekend. The GF just started a new job... busy busy, blah blah blah, excuses excuses...

[Kayin]

Stop in and take a look at Mithril, bro-we're still hunting for a ramsink sponsor. Enzotechs for 4 cards=rape in a can.

[iandh]

I've considered one run of 3850 sinks, since I've had a couple requests for them. A bit risky because I still would have to charge $40 a set for them and not many will spend that much on cooling a midrange card.

[Kayin]

That would be 160 just to cool my setup. You'd make a fair bit, if I could swing that. I'm almost a run by myself...

I know, I'm probably the only person with 4 3850s in CrossFireX. But I'm a people too...

[Retratserif]

You think this ram sink will work with a Asetek Water Block?

[iandh]

You think this ram sink will work with a Asetek Water Block?

Could you show me a picture of the block mounted to the card, or at least a good picture of the block? I should be able to tell by that...

[Synomenon]

Great to hear your considering making custom sinks for newer cards iandh.

[olavt]

It would be great to get heatsinks for the Nvidia 9600GT.

Here's my card (ready to get some heatsinks):

[Trice]

The 9800 GTX doesnt fit with these I didnt think the mosfet version would, but I was hoping the GDR part did. They moved the hole on the bottom bend of the car probably 5 mm to the right so only the top portion will screw in.

[iandh]

The 9800 GTX doesnt fit with these I didnt think the mosfet version would, but I was hoping the GDR part did. They moved the hole on the bottom bend of the car probably 5 mm to the right so only the top portion will screw in.

Yep, the holes and component locations are different.

I have 9800gtx sinks in production right now, they should be in stock at Petras and Sidewinder next week.

[Kayin]

Sounds like good news all around, bro.

YGPM, BTW.

[welshtom]

I have some 8800 GT sinks custom anodised in RED if anyone is interested?

I had them done for someone but they have backed out. I have 2 sets.

Tom