Thermalright HR-03 Plus: Aftermarket cooling for the 8800 overclockers...

[giorgos th.]

Well i found my own way while i was sleeping and did it today with the help of tie wraps and the protective spongie thing from the box of HR-03 plus..

First of all i put a small piece of sponge between the cooler`s base and the cap for the screws so that i can pass the tie wraps through the holes and give the correct pressure...(kinda like a spring onto a bolt)...
secured the cooler onto the card with double tie wrap ends,plac3d the Scythe 9mm and voila....rock stable...

Temps are about 34C idle with the fan at the lowest rpm (~1200) and around 44C load with 22C room temp...