Official DFI LanParty UT X38-T2R(and LT) Discussion/Review/Overclock/Guide Thread

[Russian]

If people are having issues with their QX9650's will Q9450 owners have them as well? :o

[zsamz_]

If people are having issues with their QX9650's will Q9450 owners have them as well? :o

try it n tell us lol

[Russian]

try it n tell us lol

Why doesnt it work though? The x38 boards are made to support these chips, if they dont we deserve a refund since its on the box itself. Honestly though, are the problems occurring when overclocking?

[ReTiCuLeX]

::Slits his wrists:: lol j/k

Well, I guess tonight i'll take out a pair of my ram and give it another go.

[PhilDoc]

::Slits his wrists:: lol j/k

Well, I guess tonight i'll take out a pair of my ram and give it another go.

Sounds like a good plan, didn't realize you were running 4 gig. Should have looked at your sig, lol. I'd keep the Ballistix set. Don't know about the Patriot, but the Ballistix run pretty well on this board as long as you don't have any of the new revision.

[ReTiCuLeX]

They're Micron D9's. Only thing that puzzles me is, why can't I run all 4 gb's @ say 800mhz memory, relaxed timings and still OC the CPU itself to 3.X-4.Xghz ?

I tried Raising the NB Voltage to 1.5v and wow...it went up to 43c and hard locked in BIOS after the unsucessful boot into Windows of a BSOD.

[zsamz_]

They're Micron D9's. Only thing that puzzles me is, why can't I run all 4 gb's @ say 800mhz memory, relaxed timings and still OC the CPU itself to 3.X-4.Xghz ?

I tried Raising the NB Voltage to 1.5v and wow...it went up to 43c and hard locked in BIOS after the unsucessful boot into Windows of a BSOD.

you should be able to do 4.0ghz with that cpu verry easily
and you should be able to run all 4 sticks easily
if i had your cpu i'd be @ 4.5
i got my 4 sticks to 1200mhz 100% stable 1.6v nb 2.13v ram
before you even put the board in case you should prepare it lol
change the sb tim look if nb nice n flat"i put mx2 on mine" i run 1.6v lol n i get 38c full load @ 500fsb you dont like your temps get a fan lol
use divider 333/667 or 333/800 = 1:1 n 5:6
and just remember 4 stick you need more juice on nb why dont you start with 2 sticks get it stable first then you go with 4 sticks
btw you got bandaids for your wrists
i spend days of reading before i got this board goin nice and still i'm learnin
if ya need more razorblades just ask lol

[eva2000]

They're Micron D9's. Only thing that puzzles me is, why can't I run all 4 gb's @ say 800mhz memory, relaxed timings and still OC the CPU itself to 3.X-4.Xghz ?

I tried Raising the NB Voltage to 1.5v and wow...it went up to 43c and hard locked in BIOS after the unsucessful boot into Windows of a BSOD.

clock fine delay tweaking is the key http://i4memory.com/showthread.php?t=4743

Also helps to test each module individually and rate them and usually I put the best 2 modules in 2+4 dimm slots or try to match them in their banks as some modules perform better in some slots.