The Maximus Formula Thread - Help/OCing/Guide/Rampage conversion

[Grnfinger]

Can you set twister strong on strap 333/5:6 divider or only this is the only combination '5-5-5-12 @ 1066 with Strong Twister/Static Read Enabled/Trans Booster enabled (0)' ?

I run the 5:6 divider on the 333 strap @1147MHz 5-5-5-15

DRAM Static Read Control: Enabled
Ai Clock Twister : Strong
Transaction Booster : Disabled
Relax level: 1

get great bandwidth and have NO stability or boot issues

[The Fool]

They old Fool is still looking for a 24/7 setting (incl. second ram kit to be added).
Intel's sample still doing fine. Ram is selected D9GMH. 3 SPD's programmed by vendor. Ref. sig.
Any hints and tips welcome.

Kind regards

The Fool

[.OCX]

I run the 5:6 divider on the 333 strap @1147MHz 5-5-5-15

DRAM Static Read Control: Enabled
Ai Clock Twister : Strong
Transaction Booster : Disabled
Relax level: 1

DRAM Static Read Control:
This function is best set to "Disabled" for high FSB levels (450 FSB upwards). "Enabled" gives a small gain in memory access latency at the expense of overall stability. We believe this setting alters a single TRD phase to low; performance advantages either way are not stellar.

I've run with mine on Disabled for the longest time, since I got the Board. Tested 440-456 FSB with Enabled and Disabled and it seemed to do little for stability, seems more a performance related setting? I didn't boot into XP, I was just testing using Memtest Test 5.