Foxconn BlackOPS: Second round! 5.7GHz 3Dmarks

[SF3D]

Hi all!

Today I tested this board under LN2. This was my second LN2 test session with this mobo.

3D Results were quite nice.

2D results can be found from Xtreme overclocking section.

Three positive things :
+ I did not have any cold boot problems
+ All tests run without problem (except 06)
+ Really stable motherboard in all conditions

Three negative things
- 3870X2 voltage problems
- 3DM06 crashed about million times because of 3870X2
- I hate 3870X2

Setup:
Foxconn BlackOPS X48
QX9650 (1.94V-1.98V)
2GB G.Skill HZ (D9GTR DDR3)
3870X2

Voltages:
Vpll: 1.77V
Vfsb: 1.425V
VNB: 1.853V
VSB: 1.7V
Vmem: 2.32V

Mem settings:
7-6-6-15 / -6-15-7-50-7-20-16-5-8-5-7 / (1T) (PL6)

01- No lod for some reason (Didn't work at all):


03 (81237):


05 (36204):


06 (26150):


Special Thanks for Peter!

[dpa]

nice benching there fellow scholar!! need to get some LN2 on my ship to..

[Extera]

your chips flys tru 3D compared to mine.
nice bencing there..... fellow scholar

can't wait till I find the time to start overhere.

[SF3D]

These3870X2 cards are so irritating to play with. I spend almost three hours with 3DM06 without any luck.

Then I almost gave up and thought "one more run". Then it miraculously run thrugh all 3D parts

[DMH]

Just get some HD2900XT

[hipro5]

NICE runs M8....

Yes 3870x2 are pain in the arss.....

[T_M]

welcome to my world :s

[Zannema]

Nice run Pete, now bench with 2 2900

[SF3D]

Thanks guys!

I'll try crossfireX with two 3870X2 in next month, if it will be available. It is vista only, but still. It won't be easy benching I know..

I don't have 2900 cards at the moment, but I have to see if I can find something

[giampa]

nice score, guy...
I think the 3870X2 wiil surprise us by future generation drivers....

[SF3D]

nice score, guy...
I think the 3870X2 wiil surprise us by future generation drivers....

Thanks!

I really hope so.

[T_M]

EVen so with driver improvements, it doesnt change the fact that the cards are hard to work with for voltages and temperatures (not just GPU temps).

[G H Z]

Nice session SF, this board looks like a lot of fun. Not sure why LOD wasn't working for you, try Rivatuner.

[T_M]

LOD does not work on 3870X2 as far as i have tried

[andre X_X]

NO LOD for CrossFire

[Atal]

nice results, shame on the X2...can we see pictures of the board

[xwards]

nice scores

[SF3D]

EVen so with driver improvements, it doesnt change the fact that the cards are hard to work with for voltages and temperatures (not just GPU temps).

Yes. I haven't even tryed this card with Dry ice or LN2 yet. GPU Voltages drop after every part of test by 0.03V, so when benching 03 voltages go for example from 1.63V to 1.51V. In 05 I didn't see this happening. This is how my X2 works

Nice session SF, this board looks like a lot of fun. Not sure why LOD wasn't working for you, try Rivatuner.

Thanks! This motherboard is still on it's early stages, but this is best motherboard that I have tested.

LOD did not work. Drivers are not the best for 01 in any case. Nature is so low

[Catz]

Nice results there

So ati graphic cards dont have shaders?

[T_M]

Ive never seen vGPU dropping, it always increases under load for me.

[dpa]

I really hate the difference between the QXs.. my seems to stop brutally at 5500Mhz.. BLAH!! (06 cpu test that is..)

[Turrican]

nice results, sf3d.

[SF3D]

Ive never seen vGPU dropping, it always increases under load for me.

Yes, it increases for me too, but it is getting lower after every part of the test. That is my main problem with this card. Weird!

I really hate the difference between the QXs.. my seems to stop brutally at 5500Mhz.. BLAH!! (06 cpu test that is..)

Yes I do know that My previous QX did only 5.3GHz max 3DM06 cpu test.

nice results, sf3d.

Thank you!