Quote Originally Posted by Grnfinger View Post
These are my Q6600 3.6GHz Prime stable settings BIOS 907

CPU Ratio Setting : 8
FSB Frequency : 450
FSB Strap to North Bridge : 333
PCI-E Frequency: 110
Ai Clock Twister : Strong
Transaction Booster : Disabled
Relax Level 0

CPU Voltage : 1.475v (BIOS)
CPU PLL Voltage : 1.58v (BIOS)
North Bridge Voltage : 1.49v (BIOS)
DRAM Voltage : 2.1v (BIOS)
FSB Termination Voltage : 1.40v (BIOS)
South Bridge Voltage : 1.075v (BIOS)
Loadline Calibration : Enabled
CPU GTL Reference : 0.63x
North Bridge GTL Reference : 0.67x
SB 1.5V Voltage : 1.50v (BIOS)

CPU Spread Spectrum : Disabled
PCIE Spread Spectrum : Disabled
I tried it with my setup, except I did 445 x 9, and it booted, did a 3DMark CPU run and it was stable... But when I run Prime95 for 15 min it crashes...
I'm using like you say 4 x 1GB stick, and Vista X64, thought I kept the NB @1.49 and I did the above things.

I did set the NB now on 1.51 and PCI-e on 105Mhz becuase I got no internet on 110Mhz .

Thxn for the settings, and I hope we all can keep helping each other !

(PS: Do I need to adjust the PLL voltage for my high speed ? )