Results 1 to 25 of 129

Thread: MARS really is quite a sweet board now bios is mature

Hybrid View

  1. #1
    Xtreme Enthusiast
    Join Date
    Mar 2007
    Posts
    557
    Quote Originally Posted by bingo13 View Post
    Let me get this right, if my system passes Linpack (on Vista 64) after numerous runs it is stable? Just asking, because Crysis will fail in 30 seconds at those same settings.
    Can't say much without details. If your Video Card is unstable, this surely can happen.

  2. #2
    Xtreme Addict
    Join Date
    Nov 2002
    Location
    Houston
    Posts
    1,123
    Quote Originally Posted by Cronos View Post
    Can't say much without details. If your Video Card is unstable, this surely can happen.
    Video card is stable, but that is not the point. The point is that unless you stress your entire system by various means, it is naive to say that one stress test or another will determine stability. I abide by the old saying, "Your hardware is only as stable as the software it is running."

  3. #3
    HACKED!!!
    Join Date
    Nov 2003
    Posts
    171

    Stable?

    Dear Bingo13

    I have an unstable video card also. I have been trying to balance mine on end to prove stability, and have failed quite miserably. Do check your video stableness. RGone...

    Quote Originally Posted by bingo13 View Post
    Video card is stable, but that is not the point. The point is that unless you stress your entire system by various means, it is naive to say that one stress test or another will determine stability. I abide by the old saying, "Your hardware is only as stable as the software it is running."
    Back and forth from board to board it seems.

  4. #4
    I am Xtreme
    Join Date
    Nov 2002
    Location
    South FL, USA
    Posts
    4,892
    Quote Originally Posted by RGone View Post
    Dear Bingo13

    I have an unstable video card also. I have been trying to balance mine on end to prove stability, and have failed quite miserably. Do check your video stableness. RGone...
    bob, bingo13 is AKA, gary key, anandtech.com reviewer...you better believe he stesses every inch of the board and hardware operating on it.
    BIOSTAR TPOWER I45 UNOFFICIAL THREAD

    BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK

    BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE

    ABIT IP35 PRO HEATPIPE MOD

    ABIT IP35 PRO BIOS FLASHING PROCEDURE

    IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.

  5. #5
    Xtreme Addict
    Join Date
    Nov 2002
    Location
    Houston
    Posts
    1,123
    Quote Originally Posted by Ace-a-Rue View Post
    bob, bingo13 is AKA, gary key, anandtech.com reviewer...you better believe he stesses every inch of the board and hardware operating on it.
    That is just his sense of humor... He is still upset that I call him Pops. I tried standing my video card on the desk, it was not stable at all until I bent the bracket a little. It has been stable all afternoon and I have run over 6 hours of Linpack 64, Bejeweled 2, and Crysis concurrently without it falling over yet.

    p.s. We might get a new Pro BIOS this week... In regards to the MARS board, they have come a long way with it, the first time we looked at the board, it would not POST 2x2GB at all, now it is one of the better boards for 8GB usage.

  6. #6
    I am Xtreme
    Join Date
    Nov 2002
    Location
    South FL, USA
    Posts
    4,892
    Quote Originally Posted by bingo13 View Post
    That is just his sense of humor... He is still upset that I call him Pops. I tried standing my video card on the desk, it was not stable at all until I bent the bracket a little. It has been stable all afternoon and I have run over 6 hours of Linpack 64, Bejeweled 2, and Crysis concurrently without it falling over yet.

    p.s. We might get a new Pro BIOS this week... In regards to the MARS board, they have come a long way with it, the first time we looked at the board, it would not POST 2x2GB at all, now it is one of the better boards for 8GB usage.
    ...you know, i saw a picture of pops a few days back

    GREAT about the Pro bios!!

    what's the verdict on the Foxconn X38A?...about the same as the MARS?
    BIOSTAR TPOWER I45 UNOFFICIAL THREAD

    BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK

    BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE

    ABIT IP35 PRO HEATPIPE MOD

    ABIT IP35 PRO BIOS FLASHING PROCEDURE

    IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.

  7. #7
    Xtreme Enthusiast
    Join Date
    Mar 2007
    Posts
    557
    Quote Originally Posted by bingo13 View Post
    Video card is stable, but that is not the point. The point is that unless you stress your entire system by various means, it is naive to say that one stress test or another will determine stability. I abide by the old saying, "Your hardware is only as stable as the software it is running."
    I have an infiniband card in my primary PCE_E x16 slot(s) So i don't care much about
    gaming stability and frankly don't know much.
    All i want is that reviewers start using Linpack 64 on regular basis, and do this properly. As well as more thoroughly test stability then 8GB is installed. I have not built PCs with less than 8GB for 2 years already , but these were all dual-cpu machines. My first foray into modern desktop world was somewhat disappointing - not in performance, performance is great and far better than on any common server platform available today.
    It's just common neglect of proper stability testing what pissing me off.
    Last edited by Cronos; 02-20-2008 at 06:10 PM.

  8. #8
    I am Xtreme
    Join Date
    Nov 2002
    Location
    South FL, USA
    Posts
    4,892
    Quote Originally Posted by bingo13 View Post
    Video card is stable, but that is not the point. The point is that unless you stress your entire system by various means, it is naive to say that one stress test or another will determine stability. I abide by the old saying, "Your hardware is only as stable as the software it is running."
    Quote Originally Posted by Cronos View Post
    I have an infiniband card in my primary PCE_E x16 slot(s) So i don't care much about
    gaming stability and frankly don't know much.
    if you don't care, why should bingo13 care...i know, a smart-arse statement..i am just trying to show that your approach to stability is very limited.

    All i want is that reviewers start using Linpack 64 on regular basis, and do this properly.
    you need to make your case to all the head's of each review site.

    As well as more thoroughly test stability then 8GB is installed. I have not built PCs with less than 8GB for 2 years already
    good for you but 8gb is NOT mainstream for overclockers...we are just getting into 4gb as mainstream.

    but these were all dual-cpu machines. My first foray into modern desktop world was somewhat disappointing - not in performance, performance is great and far better than on any common server platform available today.
    It's just common neglect of proper stability testing what pissing me off.
    truthfully, you should not be getting pissed over stability testing...maybe it is personally frustrating at times to attain your overclock and stability goal...still...overclocking and benching for stability should mostly be a fun sport!
    BIOSTAR TPOWER I45 UNOFFICIAL THREAD

    BIOSTAR TPOWER BOLT MOD FOR HEATPIPE AND HEATSINK

    BIOSTAR TPOWER I45 BIOS FLASHING PROCEDURE

    ABIT IP35 PRO HEATPIPE MOD

    ABIT IP35 PRO BIOS FLASHING PROCEDURE

    IP35 Pro: 9650@4000Mhz, par overclocker; Freezone Elite; 4Gb GSkill DDR-800@DDR-1068 (2 x 2gb); XFX 8800 GTS; Areca 8X PCIe in Raid 0 working at 4x speed; 4-250 Gb (single platter) 7200.10 drives; Giga 3DAurora case with side window.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •