Water Cooled Case Gallery

**~aoe~** · 02-12-2008, 12:18 PM

Originally Posted by dualbrain

Damn - nice house you have!!! Living at the sea? Looks tropical. Mor pics please

Originally Posted by awhir

haha i live in ireland

not very tropical !

I thought it looked a bit chilly

.

Still, that's a very nice rig to play with on those long winter nights

.

**ka lok** · 02-12-2008, 03:43 PM

Originally Posted by iandh

PC-A05B I saved from the dumpster at work:

I think you've done a fine job keeping such a small case so clean!
Good on you!

**0xdeadbeef** · 02-12-2008, 03:59 PM

Originally Posted by ladderman

Here’s a few day shots of my rebuild.

Very nice, ladderman! Your first rig and your build log was a big inspiration for me. I learned a lot from that.

I see that you have changed mobo. Didn't you have an evga 680i before?

You also changed the position of the fans on your BIPII. How do you mount the rad today?

**coolmiester** · 02-13-2008, 02:40 AM

Originally Posted by Meatpuppet

I like the two-tone fans, very unique. BTW, Coolermeister what is the white thing under the radiator? I looked at the linked thread in your sig but it didn't really say anything.

Its a Danger Den CM Stacker Bottom Case Shroud painted white

Originally Posted by NysoO

Case mod is great, though the hardware is really ugly, the green PCB's

I asked Tyan and Gainward for custom black and yellow pcb's but strangley they wouldn't go for it

**LockBreaker** · 02-13-2008, 02:46 AM

Can I get these fittings to work with my MCR-320?

Fittings: http://www.petrastechshop.com/1np1odthhoba1.html

Or will they give me a leaky system?

**NysoO** · 02-13-2008, 05:54 AM

Originally Posted by coolmiester

Its a Danger Den CM Stacker Bottom Case Shroud painted white

I asked Tyan and Gainward for custom black and yellow pcb's but strangley they wouldn't go for it

Darn man, the case would have been perfect if the hardware was black. It's really a pitty to have green hardware in such a case as that. But what the hell, the work you have done on the case is really good, so it kinda compensates the pcbs. Also, when using the computer, the case is closed so you will not be able to look into it so much.

**Jasy** · 02-13-2008, 08:18 AM

I have a doubt. I bought a black ice1(120) to my system just for the graphic card. It has 1/8 fitting, im going to put 10/8 tube, do you think that it will stop some of the flow? BTW, i have a S600.

**Conumdrum** · 02-13-2008, 08:22 AM

Last time, system done. I had to add a copper 180 due to tight tubing between my NB and CPU. I also added a drain T. Now it goes back on the lower shelf to clean up my room.

[IMG]

[/IMG]
[IMG]

[/IMG]

Sorry the pics aren't better. I'm a tech, not a photog.

**disruptfam** · 02-13-2008, 08:26 AM

try putting your elbow onto your leg for stabilization.. pics should come out better this way...better focus

**NysoO** · 02-13-2008, 08:34 AM

Also if you have some settings on your camera, try to put the ISO a bit higher, and the shutter(?) a bit lower, dont know the name in english.
Never use flash, the pictures comes out so sterile.

**LockBreaker** · 02-13-2008, 09:40 AM

"Can I get these fittings to work with my MCR-320?

Fittings: http://www.petrastechshop.com/1np1odthhoba1.html

Or will they give me a leaky system? "

I'm in a hurry, so it would be nice with a fast reply.

A simple "yes/no" answer would be fine.

Thank's

**dark-redeemer** · 02-13-2008, 09:50 AM

**dualbrain** · 02-13-2008, 10:05 AM

Woah great shot Redeemer!

**dark-redeemer** · 02-13-2008, 10:20 AM

Thank you

**G4h4o8s6T** · 02-13-2008, 11:14 AM

Nothing special compared to most of the builds on here

Still got some cleaning up to do, my cable-fu skills are weak

Specs in sig, and sorry for the bad pics......

**LockBreaker** · 02-13-2008, 11:44 AM

Nice case "nick".

Lian Li cases are absolutly gorgeus.

**Meatpuppet** · 02-13-2008, 12:13 PM

@ G4H4(insert more uninteligible leet speak): I like the Lian Li build. When I saw those cases, slapping a radiator in the front like you did was one of my first thoughts. How was the install on that guy, was the spacing on the front fans right for a radiator so all you have to do is rip out the front drive cages? Again, nice build.

p.s. How is the dust management on the PC-A70?

**lowfat** · 02-13-2008, 12:40 PM

Originally Posted by Darren1981

should but it back in the dumpster... thats disrespectful to all members in this forum

iandh, i think your build is amazing. It takes a lot of work to get a water setup in a small case like that.

**The[R]eaper** · 02-13-2008, 12:49 PM

Here's my setup

figured i would finally post it after replacing my motherboard with the DFI X38. thx for all the help and info provided here

. i know its messy but its working fine for me right now.
planning on adding my Ultra, and north bridge to the loop but haven't decided on which block to get. prolly wont keep this case for too long need a bit more room.
oh and dont worry about that exhaust fan i just moved it off of the north bridge cooler so you can see everything.

**bundymania** · 02-14-2008, 02:08 AM

new cam, new pics

...to be continued

**Waterlogged** · 02-14-2008, 02:31 AM

bundy, let's see the whole case mate. We're tired of seeing similar pics every time you post.

Also, your compressions don't match.

**bundymania** · 02-14-2008, 02:57 AM

ok buddy, letme see, what i can do for ya

:

**~aoe~** · 02-14-2008, 03:36 AM

Finally we see the case

. Very nice

Is the last pic in your 1st post an earlier setup? It seems that the GPU waterblock is differrent and the RAM heatspreaders also seem to be different:

Originally Posted by bundymania

**dark-redeemer** · 02-14-2008, 03:49 AM

These are pictures of two different systems

**~aoe~** · 02-14-2008, 03:57 AM

Ah - that makes more sense now

.

The 2nd last pic also seems to be the same system as the last.

Thread: Water Cooled Case Gallery

Thread Tools

Search Thread

Display

Bookmarks

Bookmarks

Posting Permissions