I played Command and Conquer 3 on it for about 3 hours, no hitches whatsoever.
Oh and I kinda started hating my BE again, I have a feeling I should probably sell the sucker cause I hate it so much. Wouldn't even start windows on 1.3v at 2.8, which worked perfectly on air. I have a feeling that the bios is reading at least 10C above what my temps are, evap at -39C and cpu at -7C...that's way off...When I first got it, I ran my E6600 on it. I could run that at 3.9, 1.55v or so, and load would hit in the negative teens because I turned the fans down to 25% cause I wanted it to be quiet. At 100% I think it was -25C or -22C, I don't remember cause the mobo died and I didn't ever get a new one. Hooray for my cheap 120mm case fan that I mounted over the chipset, no fan on it got it up to 40C, and now its at 35C so I'm happy about that. Oh and current priming settings are...
HTT=250
CPU=11.5x
NB=9x
HT-LINK=1.8ghz
vCore=1.2625, 1.25 actual
vCore-NB=1.3
vNB=1.3
And make that 34C on the chipset, its very slowly cooling down. If this gets through the night, I will take a screenshot in the morning and show you guys.
Edit: Going for 1:45 now, right about where I was earlier before I started tweaking again. Turning off the heat pads keeps the evap head at a much more constant temp, otherwise there's a slight but constant rise over time for priming.
Reply With Quote
Bookmarks