Gskill F3-12800cl7-2gbhz

[k-9]

I have this kit from distributor of Gskill in my country, so make a quick test with this in ultra low latency . I can't not have enough time to tweak beacause my company has many things to do, will be back with result of C6 & C7 soon

550@cas 5-5-5-15



600@cas 5-5-5-15



716@cas 5-5-5-15



735@cas 5-5-5-15



752@cas 5-5-5-15



768@cas 5-5-5-15

[Lalaboy]

I have the same kit! I love this G.Skill!

[iMAX]

Please more 32M PI test

[Kabauterman]

nice!

what they will cost?

waiting for CL 6/7/8 test

[M.Beier]

Nice...
When I saw your first picture I went "pff, keep going", but the last one made me drop my jaw... Opening a thread lateron tonight...

Just tested my kit, had a bit delay - studying :\

Are you results really only with 1.8V ??? I started straight off with 2.2V and my 5-4-3-9 ended at 710mhz...

[NightRaven]

well guys i own one of these lovely pairs too and will post my findings soon.

been really busy 3d benching lately

but basically i run 900mhz 7-7-7-18 1T-2T 2.1-2.2V this is for all my 3d benches

[k-9]

Nice...
When I saw your first picture I went "pff, keep going", but the last one made me drop my jaw... Opening a thread lateron tonight...

Just tested my kit, had a bit delay - studying :\

Are you results really only with 1.8V ??? I started straight off with 2.2V and my 5-4-3-9 ended at 710mhz...

this kit can't not do anything with only 1.8v , but one thing I am sure that they use D9GTR, I have already test them with 2.4v .You better use 5-4-4-9 or 5-4-4-10 for this kit, GSKill F3 don't like x-x-3-x . However, I'm will ask an distributor to give me a chance play hardcore. I want to remove heatsink and give them some dry ice now.Max bus with cas 5: 778mhz, also can pass super PI

[Lalaboy]

32m C6

[Lalaboy]

this kit can't not do anything with only 1.8v , but one thing I am sure that they use D9GTR, I have already test them with 2.4v .You better use 5-4-4-9 or 5-4-4-10 for this kit, GSKill F3 don't like x-x-3-x . However, I'm will ask an distributor to give me a chance play hardcore. I want to remove heatsink and give them some dry ice now.Max bus with cas 5: 778mhz, also can pass super PI

Yes, it`s Micron D9 GTR`s, but they don`t like the C5, C6!!!

[pcnet]

this kit can't not do anything with only 1.8v , but one thing I am sure that they use D9GTR, I have already test them with 2.4v .You better use 5-4-4-9 or 5-4-4-10 for this kit, GSKill F3 don't like x-x-3-x . However, I'm will ask an distributor to give me a chance play hardcore. I want to remove heatsink and give them some dry ice now.Max bus with cas 5: 778mhz, also can pass super PI

Go go please

[M.Beier]

this kit can't not do anything with only 1.8v , but one thing I am sure that they use D9GTR, I have already test them with 2.4v .You better use 5-4-4-9 or 5-4-4-10 for this kit, GSKill F3 don't like x-x-3-x . However, I'm will ask an distributor to give me a chance play hardcore. I want to remove heatsink and give them some dry ice now.Max bus with cas 5: 778mhz, also can pass super PI

Mine does..
G.Skill heatspreader is very easy to remove, done with all my kits, just to see chips, but yes, D9GTR.
I'd might get my board moded once I have time for another run, I got a very good feeling about this kit... 840mhz 6-5-4-xx at 2.2v, and they'll probaly do more, Im going for 1000mhz CL7... Im not afraid of voltage, 10mhz higher for me is worth toasting...

[saaya]

Im not afraid of voltage, 10mhz higher for me is worth toasting...

you mean once it dies your just gonna do an rma? or do you honestly have enough money and dont care about burning up 400 euros worth of memory?

[M.Beier]

you mean once it dies your just gonna do an rma? or do you honestly have enough money and dont care about burning up 400 euros worth of memory?

I've killed two pairs since DDR was introduced, no expensive sticks, never made a RMA on ram - reported a DOA once, only piece of HW I've ever received that was DOA...

But wouldnt mind killing a pair due overvoltage if it gained a few mhz

[Oliver]

Looks good.

Marc i hope you soon post and maybe look around and say hello.

Keep pushing it.

[Lalaboy]

this kit can't not do anything with only 1.8v , but one thing I am sure that they use D9GTR, I have already test them with 2.4v .You better use 5-4-4-9 or 5-4-4-10 for this kit, GSKill F3 don't like x-x-3-x . However, I'm will ask an distributor to give me a chance play hardcore. I want to remove heatsink and give them some dry ice now.Max bus with cas 5: 778mhz, also can pass super PI

The D9 GTR never running 5-4-4-9 32M stable!!!!
See this 32M!!
Try it!

[M.Beier]

Hmm, lets work some magic...

2.7v CL5 soon too come...

[k-9]

hehe, too busy with spring festival, anyway another test with cas 5, really like this kit
762-cas 5



774-cas 5



781-cas 5



although validated with 1600-cas 5, maybe need change cooling for this kit

http://valid.x86-secret.com/show_oc.php?id=309373

[k-9]

here some results with cas 5-5-5-15 1600

Pi 1Mb



Pi 4Mb

[M.Beier]

Holy moses
Try'n run SiS BW on those beasts

[Oliver]

Looks good, what vdimm have you used to cl5 clocks?.

Keep pushing it.