-
Ok I cannot get this thing to boot into windows with the following settings. It will POST but will not get to the windows logon, it'll just remain black.
CPU Freq: 400
DRAM Freq: 800
Performance Mode: Auto
PCI-E Freq: 100
PCI Clock Sync: 33.33
Memory Volt: 2.2 (as per rating @ 1066)
Vcore: 1.4
FSB Volt: 1.3
MCH: 1.65
ICH: Auto
Memory Timings: 5-5-5-15-5
Hyperpath 3: Disabled
DRAM Throttiling: Auto
I am using Raid from the chipset and not the JMicron controller
I am using the onboard soundcard
BIOS: 2301
System:
e6750 w/9700 AS5
P5W DH Dlx
8800GTX
2x Raptors Raid 0
1 IDE 500Gb
PC Power and Cooling 750w Silencer
With everything at stock (I cannot overclock) my temps are:
Idle -
CPU 95f
NB 110f
Full load -
CPU 51c
NB ?
I shouldnt be hitting a FSB wall because I am not using the SPD settings and disabled Hyperpath 3.
Any suggestions?
Last edited by next-jin; 02-12-2008 at 02:01 AM.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks