MMM
Results 1 to 25 of 918

Thread: Official eVGA 780i Discussion/Review/Overclock/Guide Thread

Hybrid View

  1. #1
    Xtreme Member
    Join Date
    Aug 2006
    Location
    CA
    Posts
    167
    My first mobo was DOA and my replacement is doing fine. Oc'ed to 3.6 but 3.2ghz is the sweet spot for silence. I decided to switch from a Maximus Formula X38 after a huge dissapointment with HD3870 Crossfire. No increase in perfomance after 7.11, 7.12 and 8.1 . Got a single 8800GTS G92 instead. I was so impressed that I decided to go SLI. Not really necessary to be honest, Crossfire or SLI doesn't increase FPS as much as people think. But no regrets, COD4 looks beautiful in 28" LCD @ 1920x1200 maxed out. CoH is really impressive w/ detail model maxed out.
    Anyway, the board itself is ok. It does what its supossed to do. I don't like the layout but maybe because I was so used to Asus boards. But I get an occasional BSOD, related to Nvidia drivers (nvgts.sys). I've been lazy and didn't try to fix it but I did some research in other forums and found out that it's not only me. Some say it's driver (mobo or video), bios, raid... whatever. And it only happens in XP, Vista 64 runs perfect. Funny thing is if it doesn't crash in the 30 sec. after load, I'm good to go. Ran Prime95 2x, 3.6 and 3.2ghz,for 9+ hours. I sincerely hope this mobo won't give me headaches like previous 680i chipset, but if it does, who cares? I'll step-up to 790i DDR2 or just sell it.
    Intel i7 920 @ 4Ghz - Asus P6T Deluxe - OCZ Gold 1600 3x2Gb @ 1690 - Sapphire HD 4890 (900/1100) - 2x Velociraptor 300Gb Raid0 - WD Green 1Tb - Seagate 7200.11 1.5Tb - DVD-RW DL (samsung/Pioneer) - Cooler Master 1000W - Cooler Master Stacker 830 SE - Microsoft Ergonomic Keyboard - Logitech MX Revolution - Vista 64 - Hanns-G 28"

  2. #2
    Xtreme Enthusiast
    Join Date
    Jan 2007
    Posts
    579
    Quote Originally Posted by golfjam View Post
    My first mobo was DOA and my replacement is doing fine. Oc'ed to 3.6 but 3.2ghz is the sweet spot for silence. I decided to switch from a Maximus Formula X38 after a huge dissapointment with HD3870 Crossfire. No increase in perfomance after 7.11, 7.12 and 8.1 . Got a single 8800GTS G92 instead. I was so impressed that I decided to go SLI. Not really necessary to be honest, Crossfire or SLI doesn't increase FPS as much as people think. But no regrets, COD4 looks beautiful in 28" LCD @ 1920x1200 maxed out. CoH is really impressive w/ detail model maxed out.
    Anyway, the board itself is ok. It does what its supossed to do. I don't like the layout but maybe because I was so used to Asus boards. But I get an occasional BSOD, related to Nvidia drivers (nvgts.sys). I've been lazy and didn't try to fix it but I did some research in other forums and found out that it's not only me. Some say it's driver (mobo or video), bios, raid... whatever. And it only happens in XP, Vista 64 runs perfect. Funny thing is if it doesn't crash in the 30 sec. after load, I'm good to go. Ran Prime95 2x, 3.6 and 3.2ghz,for 9+ hours. I sincerely hope this mobo won't give me headaches like previous 680i chipset, but if it does, who cares? I'll step-up to 790i DDR2 or just sell it.


    Im about to do the same thing sell of my 3870 what a dissapointed they are is the fan supplied sufficient for the NB? and I heardthe 790I is ddr 3 only.

  3. #3
    Xtreme Member
    Join Date
    Aug 2006
    Location
    CA
    Posts
    167
    Quote Originally Posted by malik22 View Post
    Im about to do the same thing sell of my 3870 what a dissapointed they are is the fan supplied sufficient for the NB? and I heardthe 790I is ddr 3 only.
    2 versions: DDR2 and DDR3, speculation around the web but makes a LOT of sense.
    I forgot to mention. MCP gets hot, over 90C. Included fan is a joke. Noisy and ineffective. Got another one on Egg and reapplied Ceramique on SB/NB/MCP. Temps are down to reasonable 50C.
    Intel i7 920 @ 4Ghz - Asus P6T Deluxe - OCZ Gold 1600 3x2Gb @ 1690 - Sapphire HD 4890 (900/1100) - 2x Velociraptor 300Gb Raid0 - WD Green 1Tb - Seagate 7200.11 1.5Tb - DVD-RW DL (samsung/Pioneer) - Cooler Master 1000W - Cooler Master Stacker 830 SE - Microsoft Ergonomic Keyboard - Logitech MX Revolution - Vista 64 - Hanns-G 28"

  4. #4
    Xtreme Enthusiast
    Join Date
    Jan 2007
    Posts
    579
    Quote Originally Posted by golfjam View Post
    2 versions: DDR2 and DDR3, speculation around the web but makes a LOT of sense.
    I forgot to mention. MCP gets hot, over 90C. Included fan is a joke. Noisy and ineffective. Got another one on Egg and reapplied Ceramique on SB/NB/MCP. Temps are down to reasonable 50C.
    Thx for the response what size fan will fit the NB 40mm,60mm?
    and does the thermalright ultra extreme fit on this mobo.

  5. #5
    Xtreme Member
    Join Date
    Feb 2005
    Posts
    478
    Quote Originally Posted by malik22 View Post
    Thx for the response what size fan will fit the NB 40mm,60mm?
    and does the thermalright ultra extreme fit on this mobo.
    60mm fan fits nicely on the nb. I used a Vantec Stealth 60x25mm and tie wrapped it to the nb sink. Looks decent, cools better (5-6c temp drop) and is waaaay quieter than the stock (blow dryer).
    Asus P6T6 Revolution/Core i7 965EE
    Vista Ultimate 64bit
    BFG GTX295
    6x2gig OCZ Platinum DDR3-1600
    Samsung SH-S223Q
    2 640gig WD's in raid 0
    Areca ARC-1210
    Auzentech X-FI Forte/Z-5500's
    Corsair 1000w psu

  6. #6
    Xtreme Enthusiast
    Join Date
    Jan 2007
    Posts
    579
    Quote Originally Posted by shawn1998 View Post
    60mm fan fits nicely on the nb. I used a Vantec Stealth 60x25mm and tie wrapped it to the nb sink. Looks decent, cools better (5-6c temp drop) and is waaaay quieter than the stock (blow dryer).

    Thx do you think this delta fan will fit with a thermalright ultra extreme 120 for the cpu
    http://www.pc-cooling.ch/product_inf...oducts_id=2743
    its a 60x38mm pushing 50cfm.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •