***OFFICIAL Asus P5K-E/WiFi Thread

[Bogge]

You don't have anything overclocked yet do you? Make sure everything is
set within it intended spec. Also check your required voltage of your ram
it may be getting only 1.8v when it needs ~2.0v to operate at pc6400
spec. Check with the mem manufacture and find out what volts it needs. Don't overlook this.

Also I've seen this a thousand times, Is your CPU fan plugged in?

Good Luck

No nothing is overclocked

Like I said formerly I have tested all on auto and by the specs nothing will work.

Perhaps my grafik card is damedge it´s kind of hot and is not doing enything, I will trie with the old one to night and se what it says!

My CPU fan is plugged in.

[CrazyNutz]

No nothing is overclocked

Like I said formerly I have tested all on auto and by the specs nothing will work.

Perhaps my grafik card is damedge it´s kind of hot and is not doing enything, I will trie with the old one to night and se what it says!

My CPU fan is plugged in.

Ok, Well try that, But also note With your DRAM voltage set to Auto the
mobo likely still under volting it (1.8volts) your memory likely needs 2.0v or so,
that means you'll will have to Manually set it. I had to do the same thing.

Check with your mem manufacture to find out what voltage it is supposed
to be set to run 800mhz (pc6400), and manually set it to that in the bios.

UPDATE:
I did a google search for your ram volatage, everwhere states that it needs a
minimum of 1.9v to run at pc6400, the auto setting in the bios will default this
to 1.8v (not enuff). Manually set it to 1.9 in the bios.

[Bogge]

Ok, Well try that, But also note With your DRAM voltage set to Auto the
mobo likely still under volting it (1.8volts) your memory likely needs 2.0v or so,
that means you'll will have to Manually set it. I had to do the same thing.

Check with your mem manufacture to find out what voltage it is supposed
to be set to run 800mhz (pc6400), and manually set it to that in the bios.

UPDATE:
I did a google search for your ram volatage, everwhere states that it needs a
minimum of 1.9v to run at pc6400, the auto setting in the bios will default this
to 1.8v (not enuff). Manually set it to 1.9 in the bios.

Hi and thanks for the help I will try that to se what happens.

anyone alse that can give me more tips?