Nice work Tanamoril...
Now all we need is a bios flash tool (or if there is one I need to know!)
Look forward to the leak test/temp results
Nice work Tanamoril...
Now all we need is a bios flash tool (or if there is one I need to know!)
Look forward to the leak test/temp results
Q6600 G0 @ 3.6GHz 24/7, 4.0GHz benching
Asus Blitz
XFX 9800GX2
4GB ReaperX @ 1066mhz 5-5-5-15
24" Dell 2405FPW
X-Fi Xtreme
Custom Water Cooling
PCP&C Silencer 750w
Lian Li V1000B
2x250GB 16MB Raid0, 1x750GB 32MB
Vista 64bit Ultimate
Leak testing passed on both blocks!![]()
I managed to find a pump I could use for more accurate results. Pictures and reinforced secondary mount to follow shortly.
CM Cosmos - Window Mod | Q6600 G0 @ 3.60 v1.34 | DFI LP X38-T2R | 4GB DDR2-800 OCZ | 3 x 250GB Barracuda RAID 5 - 500GB |
Dell 2407WFP-HC | ATi 3870x2 | Auzentech X-Fi Prelude 7.1 | Logitech Z-5500 5.1 | Tagan ABS 1100W BZ Series | G15 Rev.2 | G9
Water Cooling Loop -
Thermochill PA 120.3 | DDC 3.2 w/ Petra's Top | D-Tek Fuzion w/ Quad Nozzle, Washer, & Pro-Mount | MCW30 | 2 x MCW60 | EK 150 Res Rev.2 | Tygon 1/2" ID 3/4" OD |
Heres the results -
Water Cooling Testbed:
![]()
[EDITED: Removed 'Bolt Arrangment' picture as the 'Testbed' displays the bolt arrangement more clearly]
Last edited by Tanamoril; 02-07-2008 at 12:38 PM. Reason: Removed 'Bolt Arrangment' picture as the 'Testbed' displays the arrangement more clearly.
CM Cosmos - Window Mod | Q6600 G0 @ 3.60 v1.34 | DFI LP X38-T2R | 4GB DDR2-800 OCZ | 3 x 250GB Barracuda RAID 5 - 500GB |
Dell 2407WFP-HC | ATi 3870x2 | Auzentech X-Fi Prelude 7.1 | Logitech Z-5500 5.1 | Tagan ABS 1100W BZ Series | G15 Rev.2 | G9
Water Cooling Loop -
Thermochill PA 120.3 | DDC 3.2 w/ Petra's Top | D-Tek Fuzion w/ Quad Nozzle, Washer, & Pro-Mount | MCW30 | 2 x MCW60 | EK 150 Res Rev.2 | Tygon 1/2" ID 3/4" OD |
Even though the current arrangement is definitely leak proof, with perhaps the exception of an Iwaki, I arranged another mounting system to add a little extra to the seal.
100% Sealed Design -
Flipping the block over, copper side up, put a washer on each of the two screws and slide them through the mounting holes built into the block that were designed for the two-hole back mount, towards the black top. Make sure the stock screws originally designed to hold the block together are on the opposite ends of these mounting holes when installing. After sliding the screws through the mounting holes, use two of the open-ended screws used on backplate to fasten the screws into place. After that the water block should be perfectly sealed. Enjoy!![]()
![]()
![]()
[Blocks are arranged fully assembled as though already mounted]
Last edited by Tanamoril; 02-07-2008 at 12:39 PM.
CM Cosmos - Window Mod | Q6600 G0 @ 3.60 v1.34 | DFI LP X38-T2R | 4GB DDR2-800 OCZ | 3 x 250GB Barracuda RAID 5 - 500GB |
Dell 2407WFP-HC | ATi 3870x2 | Auzentech X-Fi Prelude 7.1 | Logitech Z-5500 5.1 | Tagan ABS 1100W BZ Series | G15 Rev.2 | G9
Water Cooling Loop -
Thermochill PA 120.3 | DDC 3.2 w/ Petra's Top | D-Tek Fuzion w/ Quad Nozzle, Washer, & Pro-Mount | MCW30 | 2 x MCW60 | EK 150 Res Rev.2 | Tygon 1/2" ID 3/4" OD |
Niiiice
I want to see some temps
Can you check your max oc on the stock cooler please, then on water to give an indication of what I might expect (given mine seems to be a crud clocker...)
Q6600 G0 @ 3.6GHz 24/7, 4.0GHz benching
Asus Blitz
XFX 9800GX2
4GB ReaperX @ 1066mhz 5-5-5-15
24" Dell 2405FPW
X-Fi Xtreme
Custom Water Cooling
PCP&C Silencer 750w
Lian Li V1000B
2x250GB 16MB Raid0, 1x750GB 32MB
Vista 64bit Ultimate
Sure thing, I'll have temps up on Monday.
CM Cosmos - Window Mod | Q6600 G0 @ 3.60 v1.34 | DFI LP X38-T2R | 4GB DDR2-800 OCZ | 3 x 250GB Barracuda RAID 5 - 500GB |
Dell 2407WFP-HC | ATi 3870x2 | Auzentech X-Fi Prelude 7.1 | Logitech Z-5500 5.1 | Tagan ABS 1100W BZ Series | G15 Rev.2 | G9
Water Cooling Loop -
Thermochill PA 120.3 | DDC 3.2 w/ Petra's Top | D-Tek Fuzion w/ Quad Nozzle, Washer, & Pro-Mount | MCW30 | 2 x MCW60 | EK 150 Res Rev.2 | Tygon 1/2" ID 3/4" OD |
Main: oo7
i7 920 D0 (4Ghz) || Asrock X58 Extreme
Corsair 8GB DDR3 1600 || HIS HD 6850 1GB
Corsair HX850 PSU || 2x Seagate 500GB 7200.12
3x Dell E2311H 23" LED LCD (Eyefinity)
[Flickr] - Canon 30D || 50mm f/1.8 PRIME || 28-135mm f/3.5-5.6 IS USM
Bookmarks