Quote Originally Posted by Spyrus View Post
1)I tried 1.33V for 4050 but it was no go
2)So i kept my 1.3V and lower to 3950. Prime still no go.
3)I did not went over 1.45V. And this voltage for 4.5GHz was only for one hour benching session.
4) I have the Maximus formula. I kept these settings in 24/7 and in benching
PLL was minimum to 1.5 but mobo overvolts to 1.6
FSB Termination to 1.2 but mobo undervolts to 1.1 because of Wolfdale. With
my E6750 previously 1.2 was 1.2 no undervolting. That means that Formula
has considered the right FSBTermination for Wofdales.
5)Since first day i was running at 1.3@4050 and after the benching session i had
the degrade.

Conclusion for me:all wolfdales that needs low voltage at start will degrade and reach those that are not good overclockers (e.g. 1.45V@4GHz) even at low voltages.Even if i have not raised the vcore to 1.45 i would still have the degrade in my opinion.

To sum up in order to bench at 4500@1.45V
CPU PLL: 1.50 ~ 1.6 monitor
FSBv/ VTT: 1.20 ~ 1.12 monitor
CPU GTL: 0.63x
NB GTL: 0.67x
Sorry for misunderstanding but my cpu is ok for now
Forgotten to loosen memory timings after bench sessions