The Maximus Formula Thread - Help/OCing/Guide/Rampage conversion

[Talonman]

I don't currently know where to adjust that number.

And what would be a good value to put in while testing when I find it?

Going to try upping the NB voltage a tad first, and re try a FSB of 228 again to see if Prime likes it any better...

Then might live in the edge and UP the CPU voltage a tad more, and try 428 again.

Be back soon with my report.

[tommithy]

I don't currently know where to adjust that number.

And what would be a good value to put in while testing when I find it?

Going to try upping the NB voltage a tad first, and re try a FSB of 228 again to see if Prime likes it any better...

Then might live in the edge and UP the CPU voltage a tad more, and try 428 again.

Be back soon with my report.

To change the TRD on this board set your transaction booster to either disabled or enabled and then change the relax settings. When pushing high FSB you will want to set it to Disabled with a Relax of 0. As you go faster you may have to change Relax to 1 or 2.

[Talonman]

Just booted with my 3.81GHz settings, but set the Transaction booster Disabled, and relax set to 0.

I am going to see if I can get a highr FSB frequency withought upping the CPU Core voltage any.

Thanks for using the key words 'Transaction booster'!!

I can find that!

Update: It worked... It worked!!
Setting the transaction booster to Disabled, and relax to 0 successfully let me Prime at a FSB Frequency of 426 for some 3.83GHz error free operation...
That is withought adding to my CPU's core voltage...

Going back for more!